--- In papercreters@yahoogroups.com, Pat B Parham <texasweldinginspector@...> wrote:
>
> Does your sliding gate valve have a rubber seal or is it the metal to metal type?
>
> Thanks
>
> --- On Fri, 7/10/09, russsouza <spike9345@...> wrote:
>
>
> From: russsouza <spike9345@...>
> Subject: [papercreters] Building a tow mixer
> To: papercreters@yahoogroups.com
> Date: Friday, July 10, 2009, 3:37 PM
>
Yes, it has a medal to medal gate. I saw the trunk system and in that tape the guy recomended the gate sys. After many good ideas I think the longer blade trav. to slow on the outside edge. It appears the 26-28 inch blade is the normal size. Will cut mine and retry it.
As for the gate real problem to change now am looking for a 6 inch ball so I can plug from inside.
>
>
>
>
>
>
>
> I have built a tow mixer as the normal inst. advise. I used a fence post at 38 inches for a blade. Is this to long? It seems to catch the paper in clumps. Also put in a sliding gate for a door and it leaks alot. Should I go to a shorter blade (lawn mower 28 inch).
> Thanks russ
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:papercreters-digest@yahoogroups.com
mailto:papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
