Monday, January 4, 2010

RE: [papercreters] Is There a Video On Constructing a 55 Gallon Drum Mixer



Hi All,

 

It strikes me that the right angle gearbox from a tractor mounted grass slasher would be the right size for a stationary mixer about the same size as a tow mixer.  Depending on the size of the mower power input is up to 60hp. It already has the splined inputs and outputs for shaft connections, with a wide variety of shafts and shaft adaptors available off the shelf.  They are also designed for severe shock loadings, so coping with mulching paper would be a cinch.  It could be driven by an old tractor, or truck engine and gearbox with a modified governor.  Most likely it would also need a reduction box between the box and the drive shaft to get the rpm right, as most tractor ptos are designed for 550rpm, and the RPM from an engine and gearbox would definitely be too hight.  There are inexpensive reduction boxes for PTOs available that would bolt straight in, you would just need to consider the HP rating (torque)  ie if you use a 20Hp tractor through a 3.1 box then the slasher box needs to cope with 60hp.

Main issue I can see is similar to that with a tow mixer, sealing the mixer shaft, but since it can be done with a tow mixer then...

 

Trev

 

From: papercreters@yahoogroups.com [mailto:papercreters@yahoogroups.com] On Behalf Of calle vallede
Sent: Tuesday, 5 January 2010 8:57 AM
To: papercreters@yahoogroups.com
Subject: [papercreters] Is There a Video On Constructing a 55 Gallon Drum Mixer

 

 

Yea Elliot,

 

I would like to see one of those also.  We have way to many hills and ruts to drive a tow mixer with.  I also see a stationary one as mixing while I am doing other things.

 

Thanks for asking.

--- On Mon, 1/4/10, daschundpal <daschundpal@gmail.com> wrote:


From: daschundpal <daschundpal@gmail.com>
Subject: [papercreters] Is There a Video On Constructing a 55 Gallon Drum Mixer
To: papercreters@yahoogroups.com
Date: Monday, January 4, 2010, 1:04 PM

 

Hi,
In going through some of the older emails it looks like a lot of great information is available here. As someone new to papercrete I will just take my time and see some of the threads that have developed. The youtube videos pull you right in and make you want to start a project. I have a number of videos myself including one on how to construct a tow mixer. What I would like is a video on how to construct a 55 gallon drum mixer (metal or heavy plastic) that uses a tough strong gas or electric motor. I've seen several of these in photos and videos but unless I am missing something, I have not seen a video on how to construct one. Have a great new year.
elliott

 



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___