[papercreters] Re: PC & Fiberglass

Hi does your ground fiberglass look like tiny pebbles or fine dust? If it is dust you could try what the Para-Crete inventor does and use a mix of latex paint watered first, then add with cement, and other additives. Liquid soap or latex keeps the tiny 'beads' of styrofoam he uses to keep from floating and actually mix well with the materials. I don't have any EPS beads/dust as he does (he gets them by the huge bagful at a local factory, it is waste from sheet production) Wear all the protection of course, esp, breathing gear just to be safe

Charmaine R. Taylor
retired but still experimenting

--- In papercreters@yahoogroups.com, "trendawareness" <trendlinesystems@...> wrote:
>
> I may have access to several hundred pounds of ground fiberglass.
>
> This is scraps from the manufacture of reinforced fiberglass boards that has been ground back into a powder.
>
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/