[papercreters] Re: Scissors mixer

Spaceman,

This is just theory, but it looks like your "cutter blades" are going to turn too fast. The pulleys look like about a 2 to 1 slowdown. So if the motor is 1100 rpm, the cutters will spinning about 500 rpm. You may need a jack-shaft to drop it down further.

It would also increase the power of the cutters.

Just guessing.

Bobby



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/