--- In papercreters@yahoogroups.com, "phantymlove" <tightwadsigns@...>
wrote:
>
> Ok, now you've got me thinking. Would it be possible to make one of
> those trailer blocks where you pull your dual-axle trailer onto it
> and can change a tire without a jack?
Yep. If you really want to use papercrete, I would use the below link
as a guide. Basically, you are building a ~6" high block, ~16x16" wide
with a ~10" (30 or so degree) ramp on the front of it.
The ~ just means approximately, and the angle is not terribly important
as long as you are able to drive the trailer up onto it. Here is the
link in case you just want to build one from two by stock.
http://www.cowboyshowcase.com/tires.htm
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:papercreters-digest@yahoogroups.com
mailto:papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
