If you do monolithic walls of sufficient thickness you should not need framing other than a bond beam and roof joists or vigas, and around openings.
spaceman All opinions expressed or implied are subject to change without notice upon receipt of new information. http://Starship-Enterprises.Net
On 11/3/2010 1:45 PM, Teresa P wrote:
Would it be feasible to run barbed wire and/or wire mesh and/or scrap metal all tied together in various fashions with metal up and down a wall and across a roof to the other side of the building and up and down those walls. Frame it out with light weight cheap metal conduit pipe with the wires/mesh/etc running all over the place tied to the conduit pipe. Then pour a monolithic pc with slip form and/or blocks with wires embedded and sticking out of the blocks to tie to other blocks? I hope I explained this right.... the idea is to frame the building cheaply with scraps of metal tied (not necessarily welded) together and have them embedded into the pc ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/papercreters/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/papercreters/join (Yahoo! ID required) <*> To change settings via email: papercreters-digest@yahoogroups.com papercreters-fullfeatured@yahoogroups.com <*> To unsubscribe from this group, send an email to: papercreters-unsubscribe@yahoogroups.com <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ ----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1144 / Virus Database: 424/3230 - Release Date: 10/31/10
__._,_.___
