Would it be feasible to run barbed wire and/or wire mesh and/or scrap metal all tied together in various fashions with metal up and down a wall and across a roof to the other side of the building and up and down those walls. Frame it out with light weight cheap metal conduit pipe with the wires/mesh/etc running all over the place tied to the conduit pipe. Then pour a monolithic pc with slip form and/or blocks with wires embedded and sticking out of the blocks to tie to other blocks? I hope I explained this right.... the idea is to frame the building cheaply with scraps of metal tied (not necessarily welded) together and have them embedded into the pc
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
