It's tricky you have to put it up on pallets with the drive wheel sitting on the roller just right or it will jump it does not go far because it is in the air but alignment is everything with just enough traction to turn the rollers. I control the speed by turning up the carb jet screw that way I get fuel air mix just right for that load\.
Ken
http://groups.yahoo.com/group/12VDC_PowerPLus/
http://groups.yahoo.com/group/PapercreteEarthbagsandVeggieoilohmy/
http://groups.yahoo.com/group/papercreters/
http://solarpanelkitatharborfreight.ning.com/
http://groups.yahoo.com/group/HomeMadeHydroponics/
http://groups.yahoo.com/group/barrelponics/
http://groups.yahoo.com/group/alcoholfuel/
From: David Jungeblut <freightlimo@gmail.com>
To: papercreters@yahoogroups.com
Sent: Tuesday, March 20, 2012 2:59 PM
Subject: Re: [papercreters] Re: MIXERS;
The go kart sounds awesome!! :)
If the killer robots or the building police turn up, you can just kick the props out from under it and get out of Dodge!! :/
http://groups.yahoo.com/group/PapercreteEarthbagsandVeggieoilohmy/
http://groups.yahoo.com/group/papercreters/
http://solarpanelkitatharborfreight.ning.com/
http://groups.yahoo.com/group/HomeMadeHydroponics/
http://groups.yahoo.com/group/barrelponics/
http://groups.yahoo.com/group/alcoholfuel/
From: David Jungeblut <freightlimo@gmail.com>
To: papercreters@yahoogroups.com
Sent: Tuesday, March 20, 2012 2:59 PM
Subject: Re: [papercreters] Re: MIXERS;
The go kart sounds awesome!! :)
If the killer robots or the building police turn up, you can just kick the props out from under it and get out of Dodge!! :/
On Tue, Mar 20, 2012 at 4:26 PM, ken bolin <bornofthehorses@yahoo.com> wrote:
Well I guess the last project with it was the floors of 2 10ftx20ft ponics bays 8in thick it took 10 loads each and the mixer holds a 100gal, done 4 loads a day, mixed cardboard and paper, the only thing I have had to do to the cart was change the oil. The project before that was a 32ftx18ftx8.5ft slipformed over sand bags building plus a couple of little buildings like the dog house in the pictures file.Kenhttp://groups.yahoo.com/group/12VDC_PowerPLus/
http://groups.yahoo.com/group/PapercreteEarthbagsandVeggieoilohmy/
http://groups.yahoo.com/group/papercreters/
http://solarpanelkitatharborfreight.ning.com/
http://groups.yahoo.com/group/HomeMadeHydroponics/
http://groups.yahoo.com/group/barrelponics/
http://groups.yahoo.com/group/alcoholfuel/
From: Donald Miller <donald1miller@yahoo.com>
To: papercreters@yahoogroups.com
Sent: Tuesday, March 20, 2012 9:47 AM
Subject: Re: [papercreters] Re: MIXERS;
From: ken bolin <bornofthehorses@yahoo.com>
Subject: Re: [papercreters] Re: MIXERS;
To: "papercreters@yahoogroups.com" <papercreters@yahoogroups.com>
Date: Monday, March 19, 2012, 11:18 PM
If I may if you look at Ken's stuff in the photo's you will see I used my little go cart on rollers to power one of my mixers and that thing ran all day on a 1 1/2 gal tank. Be it electric or fuel powered you can mix loads cheap it is all about your approach for me it is what do I have in my parts pile or the tool shed that will work. That is how I built my latest barrel mixer everything in it was stuff I had on hand.
Kenhttp://groups.yahoo.com/group/12VDC_PowerPLus/
http://groups.yahoo.com/group/PapercreteEarthbagsandVeggieoilohmy/
http://groups.yahoo.com/group/papercreters/
http://solarpanelkitatharborfreight.ning.com/
http://groups.yahoo.com/group/HomeMadeHydroponics/
http://groups.yahoo.com/group/barrelponics/
http://groups.yahoo.com/group/alcoholfuel/
From: David Jungeblut <freightlimo@gmail.com>
To: papercreters@yahoogroups.com
Sent: Monday, March 19, 2012 9:51 PM
Subject: Re: [papercreters] Re: MIXERS;
As I see it the primary reason behind the original design of Mr. McCain's mixer was to take advantage of items close at hand for minimal cost and maximum effect. The fact that the drive-line was originally powered by a 100 hp is more incidental than necessary.
Like I said, I can pull the mixer around (empty) all day long without breaking a sweat.
I've pull-started a 16,000 pound, 500 hp semi tractor with a 1984 Chevette diesel weighing in at under 2,000 pounds and 50 hp...
more than once.
I dragged my mixer out today & after I raised the wheels I spun the blades easily with two fingers.
Almost everyone who has a mixer has shot half a load of slurry into the air by using more than a fraction of the (let's just say) 100 hp available at the pedal.
I've seen long conveyors being driven by little 4 or 5 inch tires attached to smallish little electric motors that are just simply amazing on the face of it.
I don't see it as trying to move the blade through 60 or 80 pounds of paper.
I see it as trying to move the blade through whatever amount is in contact with the cutting edge of the blade.
Or more succinctly, to move the blade along with whatever is in contact with it.
Eventually the paper will surrender.
The 15" tire drives a 2' pinion.
The 2" pinion drives an 8" ring.
The 8" ring drives a blade that is 3/16's of an inch thick.
OVERKILL!! to say the least.
A treadmill might not drive the tire.
It certainty won't do the same job as pulling the mixer.
But the 2x6 belt on the treadmill is driven by a 3" or 4" wheel attached to a 1/2' shaft.
Fascinating...
but then again, I'm easily amused. :-)
I think a person could raise one wheel, get on the tire and WALK paper into slurry...
eventually.
Yeah, a load of phone books would really put a crimp in your day but there are already people here who shred paper before making slurry to accommodate the mixers that they've fashioned so I'm thinking if it works at all it would benefit some since the point is cheap & easy.
On Mon, Mar 19, 2012 at 10:54 PM, joel <joelincalif@aim.com> wrote:
We shouldn't forget that the standard tow-mixer is a seriously heavy duty mixer, made with the re-purposed rear end of a car or truck that was driven by a 100+ horse power engine, now being towed by a car/truck still providing 100+ horse power. This is a mixer capable of applying hundreds of pounds of horse power to the task of mixing paper.
--- In papercreters@yahoogroups.com, "jungleblood2" <freightlimo@...> wrote:
>
> What about using a re-purposed treadmill to drive a tire on a tow mixer??
>
We've not going to be able to cheaply replace the paper mulching capability of this low-cost heavy duty mixer with an old treadmill or electric AC/DC motors. We may be able to get the blade to spin with a treadmill but the first phone book or cardboard box will quickly tear it up.
__._,_.___
