Thanks Sasah
Don't know what you are refering to when you say lifts, as far as I know there hasn't been any sagging on anything yet : )
We are pressing in by hand on the last go around of the wall we will wait two weeks let it dry good then put the ceiling up. Go back around pressing in more PC let it dry again and continue doing this until there is no more shrinkage. Then when we do the final stucco on the out side we will wrap it up and onto the roof forming a small parapet so the water does not run down the walls we have run off spouts on the down sides of the roof.
Doris
--- In papercreters@yahoogroups.com, "lebarongroup" <lebarongroup@...> wrote:
>
> Hi to Ron and Doris,
>
> Sasha here from BC Canada.
>
> Nice job on the bedroom addition!!
>
> Looks like your lifts were drying out reasonably fast and not sagging too much.
>
> I am starting a rubble trench, earth bag, papercrete, post and beam studio project up here on Hornby Island www.hornbyisland.com and will be pouring monolithic walls.
>
> However I am wondering how to finish up against the overhead beam after the wall has finished shrinking.
>
> It looks like you folks pressed it in by hand.
>
> Did this work?
> Did you get a good fit to the beam overhead?
> Any other advice?
>
> Thanks in advance
>
> Sasha
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:papercreters-digest@yahoogroups.com
mailto:papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
