As always, thanks for the update. I was rather more worried about
splash back once I added the cement, but with most of the mixing done
I am guessing the risk is lower. I use one of those plastic face masks
that covers from forehead to below chin, because I have not yet
acquired a discerning palette for newsprint pulp.
I like your idea on the pre-filter. I will have to poke around on the
web and see if I can find something that will fit right on the water
inlet of the washer and just leave it attached.
For the manifold, have you considered something like this:
My idea would be to mount the trigger mechanism above your barrel with
this on the end of it. Then put 3 turbo nozzles on the manifold. Then
attach a small belt around the smooth brass section above the 3 way
and run it off either a small electric motor or (ideally) a small take
off from the pressure washer it self (rather like the idea of a jet pump).
- Ernie
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:papercreters-digest@yahoogroups.com
mailto:papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
