Little caution- I have used an auger to mix the heavies- works good
-remember the auger is strong enough to throw you and it over an 8
foot fence- be safe - Clyde--- In papercreters@yahoogroups.com,
"Charmaine Taylor" <dirtcheapbuilderbooks@...> wrote:
>
> Here is my next "out of the box" idea.
>
> A Power post hole auger in side a 55 gallon drum. Has any one tried
> this? You could put a cutter type blade on the bottom of the auger and
> a steel plate in the bottom of the barrel with a centering bushing to
> keep the auger centered. The auger rpm is about 160.
>
> Any thoughts?
>
> Thanks,
>
> Tom
> --
>
>
> Tom- the use of a small boat turbine blade on the end of a stem
> powered by a 1/2 HP motor has shredded paper very well in a plastic
> drum.. so on design principle it might work.... I can email you a pic
> on request
>
>
> Ms. Charmaine Taylor/ Taylor Publishing
> 707 441-1632
> www.dirtcheapbuilder.com www. papercrete.com
> PO Box 375, Cutten CA 95534
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:papercreters-digest@yahoogroups.com
mailto:papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
