--- In papercreters@yahoogroups.com, "peddler8111" <fpcharnock@...>
wrote:
>
> Has anyone tried making compressed blocks w/ papercrete or paper
adobe?
>
Hi Clair here,we are building a press right now ,snow is here so its
time for inside projects.We are building a 12x14x8press with two hyd
rams,out of two pices of H chanell,keeping it on a frame as close to
the ground as we can get it i will post pics as soon as we get a little
bit further.We have our tow mixer done and it works well 200 gal,we
took two seals and put them at the blade end and drilled a hole and
taped it for a grease nipple and filled it up to create a seal,we also
did the lower pinion bering and axel berrings as well ,also drained the
diff oil out and smered the gears with bio grease so the water if any
can just drain out.hope this helps,we are looking to make 5 to 10,000
blocks for this summer.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:papercreters-digest@yahoogroups.com
mailto:papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
