Here is my next "out of the box" idea.
A Power post hole auger in side a 55 gallon drum. Has any one tried
this? You could put a cutter type blade on the bottom of the auger and
a steel plate in the bottom of the barrel with a centering bushing to
keep the auger centered. The auger rpm is about 160.
Any thoughts?
Thanks,
Tom
--
Tom- the use of a small boat turbine blade on the end of a stem
powered by a 1/2 HP motor has shredded paper very well in a plastic
drum.. so on design principle it might work.... I can email you a pic
on request
Ms. Charmaine Taylor/ Taylor Publishing
707 441-1632
www.dirtcheapbuilder.com www. papercrete.com
PO Box 375, Cutten CA 95534
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:papercreters-digest@yahoogroups.com
mailto:papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
