You are correct Ernie (thank you)
The fittings and tools to apply then can be found through manufacturers retail outlets....
Uponor. I know the tool is about $500 or so.
The closest thing to a photo is a you tube video of an art sculpture I made. Note the
horizontal rings:
http://www.youtube.com/watch?v=IcBHGGYAoKc
--- In papercreters@yahoogroups.com, "Ernie Phelps" <eepjr24@...> wrote:
>
> --- In papercreters@yahoogroups.com, "Sean Doyle" <Sean@> wrote:
> >
> > I did not stutter or miss type.
> >
> > The model number is C1236300 (Uponor/Wirsbo)
> > it is 63mm Cross-Linked Polyethylene (about 3").
> >
> > Its intended use is for street, large bldg, auditorium, or turf
> > conditioning.
>
> 2" ID, 2.48" OD, that is some big PEX. They use it alot in
> hydroponics, apparently.
>
> If you decide to use this be aware that you can't find fittings for it
> at the local hardware store. =P The price is nice, though, about 1/3
> of MSRP.
>
> - Ernie
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:papercreters-digest@yahoogroups.com
mailto:papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
