[papercreters] Re: Paint that has frozen

Clyde is right! I always use latex or acrylic in all my mixtures, if I am making a finish coat I use drywall mud, latex or acrylic paint, portland cement and fine sand blasting sand. Then after this has dried, I paint with exterior latex or acrylic paint. I have never had a problem with water getting in and not getting out. I would never use paint thinners like linsed oil, acetone, spirit etc., or oil based paints.


--- In papercreters@yahoogroups.com, "Clyde T. Curry" <clydetcurry@...> wrote:
>
> Sorry to disapoint ya but acrylic paint has a large molecule and breaths rather well - do not under in circumstance use oil base or thinners - you will never get rid of the smell - make sure water can roll off, down hill at any rate - do not allow water to puddle- hugger of trees knows all this - trust her - Clyde T. Curry
>
>
> ________________________________
> From: Ashok Mathur <ashokchand2000@...>
> To: "papercreters@yahoogroups.com" <papercreters@yahoogroups.com>
> Sent: Saturday, June 2, 2012 3:05 AM
> Subject: [papercreters] Re: Paint that has frozen
>
>
>  
> Most paint that has frozen/ become lumpy can be quickly set right by adding some quantities of paint thinners like linsed oil, acetone, spirit etc.
> You need to find out the composition of the paint, then it will be easy to find out its thinner.
>  
> Regards
> Ashok
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/