I was interested in the photos of the press, where can they be found?
Robert in Banda Aceh
From: papercreters@yahoogroups.com [mailto:papercreters@yahoogroups.com] On Behalf Of smt460
Sent: Saturday, April 11, 2009 8:48 PM
To: papercreters@yahoogroups.com
Subject: [papercreters] Re: Press
Thanks they are prety nice lookin blocks.But most of the credit goes to Bruce he has done most of the fabrication and plumbing it all together.As for doing anything differnt you bet it would be verticle not horazontal,due to gravity there is a bit of wedging at the bottom of the brick,some are fine and some have it ,i think its in the mix consitancy and delivery.We will see once we have the new hopper on.And this press is just to see if we could press them we will give this one to a friend who is going to south america to build a orfanage so this is just a proto type. We have another press in the works that we will be starting in a couple weeks once it drys up a bit.We have learend so much and thanks to everyons input from this site we have been able to come this far.We have also found a new spot to set up at right next to a busy hwy,and has a good water supply so we are moving forward every day.We have found a old grinder for grain at the acution so will modify it for drywall as we can use it in place of a % of cement.We also have 2 400 barrel silows of waste frac cement donated to us form the landfill and all the newspaper we can use.The head guy at the landfill said we are the future and landfills are old dinosuars and do not stop what we are doing,we all need to get off the couch and start recycling.Well im off to work iv got to spray my dumptruck box today before my boss has a stroke lol there is a 75% weight restriction so we cant haul anything till the end of april,3 yards in a 10 yard box doesnt pay.lol have a gerat easte weekend ttys
Clair
-- In papercreters@yahoogroups.com, "Nick Boersema" <picknick@...> wrote:
>
> Nice looking bricks Clair. I'm looking forward to the video. If you were
> starting from scratch is there anything that you have learned so far that
> would change how you built your press?
>
>
>
> Nick
>
>
>
> _____
>
> From: papercreters@yahoogroups.com [mailto:papercreters@yahoogroups.com] On
> Behalf Of Clair Schmidt
> Sent: Friday, April 10, 2009 9:06 AM
> To: papercreters@yahoogroups.com
> Subject: [papercreters] Re: Press
>
>
>
>
>
>
>
>
>
> Well 3 a min id like to see that smells a little like bs to me ,first you
> have to let the mix drain for a while.If you put the normal slurry in it
> will shoot out like a cow having a bad day.so 3 a min from what i see on his
> page ,im doutfull.Now getting the dryer mix into the chamber it has to drop
> a mesured amount in each time and every time.It does take a bit of time for
> the water to drain as well when you are moving the piston forward,and even
> then the water is coming out fast .I drilled around 150 holes to let the
> water out as you move the piston forward ,when we did the first test we
> flexed the 14 inch bridge beam while compressing so you need lots of holes
> or it will just shoot out any gap you have.I have some video of this its
> just getting edited right now ,will be doing a demo for my church and will
> video it with 4 cameras and will post it when done.The snow is melting fast
> now its a goo pit here till it drys up in a week or two. Hope this helps
> just my observations as i have actualy done it.Have a great easter weekend
>
> Clair.
>
>
>
> _____
>
> Be smarter than spam. See how smart SpamGuard is at giving junk email the
> boot with the <http://ca.promos.yahoo.com/newmail/overview2/> All-new
> Yahoo! Mail
>
__._,_.___
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___
