RE: [papercreters] Oil in mixer

Judith, Probably not.  You did that so it wouldn't spew oil all over the ground when the cover was unbolted from the differential.  Actually if you don't have vents or plugs to fill it with you may be relegated to doing that again and filling it with oil from the HUGE hole you'll have in the side.  At least you'll know if there is any water in there either way 1. drain the oil either way.  Then fill with fresh through the plug holes or if necessary the differential cover (bolted on). --- On Sun, 4/11/10, JUDITH WILLIAMS <williams_judith@hotmail.com> wrote:   Thanks Ron. I'll see if I can do as you suggest. Your tip about filling it with ketchup bottle and tubing is very helpful. I do remember that we had to turn the entire mixer over when the group was here. Will I have to do that again?

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___