Hi
I just want to ask if I understand it right how to make desired mount of papercrete with density I want
For example if I want 1 m3 (35 cu ft) of pc with density 650 kg/m3 (40.5 lb/ft3)
I'll take 1m3 of water and put into it 650kg of ingredients - dry weight (like 470kg of paper, 120kg of cement and 60kg lime)
And if I want pc with density for example 350 kg/m3 I just put less ingredients into same amount of water, maybe with little recipe adjustment.
Is my idea of it right?
So the density of a final product is controlled by density of paper slurry I'll make and then add other ingredients by weight ratio of dry paper.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
