---By the way I totally aggree with you - I would definately take a
hose and wash off any loose material before plastering -Thanks to you,
Tom, I started playing with adding sand - the sand got to heavy and I
switched to perlite- that allowed me to reach a 50 % filler level with
no loss of R value -So these mixes start with 50% less water and it is
a whole different world now- Fiber Reinforced Extreme Light-weight
Concrete ( it is half paper in the brick and one-quarter paper in the
mortar and its already code-approved Thanks Clyde In
papercreters@yahoogroups.com, "Tom Curry" <contact@...> wrote:
>
> Thanks Clyde, come to think of it, the few times where bonding was a
problem was when the mix not rich enough. -Tom
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:papercreters-digest@yahoogroups.com
mailto:papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
