I just found this interesting material/idea which may be applicable to
papercrete.
Transparent Concrete
Thousands of optical glass fibres form a matrix and run parallel to each other between the two main surfaces of each block. The proportion of the fibres is very small (4%) compared to the total volume of the blocks. Moreover, these fibres mingle in the concrete because of their insignificant size, and they become a structural component as a kind of modest aggregate. Therefore, the surface of the blocks remains homogeneous concrete. In theory, a wall structure built from light-transmitting concrete can be several meters thick, because the fibres work without almost any loss in light up until 20 meters. Load-bearing structures can be also built of these blocks, since glass fibres do not have a negative effect on the well-known high compressive strength value of concrete. The blocks can be produced in various sizes and with embedded heat-isolation.
Also uploaded some new studio photos to the gallery.
Cheers,
Sasha
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
