Saturday, July 12, 2008

[papercreters] Re: Blade Safetys end again using correct address

I think it is appropriate to point out that the welds holding those
saw blades to the central mixing paddles are the only thing keeping
the blades from flying off. Wouldn't that be a frightening
experience?

Since someone using a userid, "texasweldinginspector" is the one that
built and posted the one pictured, I have confidence that the welds
holding those particular saw blades in place very strong welds indeed.

Contrast this with a typical lawn mower blade design, where the blade
itself is one piece and does not have any welds holding the blade
itself together. An amateur with minimal mechanical experience can
easily assemble that and achieve similar strength and quality as if a
professional mechanic assembled a straight blade design.

I'm NOT saying that a lawn mower blade cannot fail. Of course it
can. A metal fatigue failure could happen with either design though.

I urge caution and care if someone wants to duplicate this saw blade
design. Welding is a skill that takes time to perfect. Weak welds
in such a design could be extremely dangerous. The faster the blade
spins, the higher the stresses on the welds.

If there is the slightest doubt in the quality of your welding, I
suggest finding someone that can make the welds perfect.

Are you building a blade or a Minotaur Ken?
From the looks of that dude in the other video, I bet they would be
more expensive to feed than an electric drill.

hehehehe


--- In papercreters@yahoogroups.com, ken bolin <bornofthehorses@...>
wrote:
>
> It is nasty looken I must build one.
> Ken
>
> --- On Sat, 7/12/08, Pat B Parham <texasweldinginspector@...> wrote:
>
> From: Pat B Parham <texasweldinginspector@...>
> Subject: Re: [papercreters] Re: Blade Safetys end again using
correct address
> To: papercreters@yahoogroups.com
> Date: Saturday, July 12, 2008, 11:30 AM
>
>
>
>
>
>
>
>
>
>
>
> Talk about a paper pulping helper! I want one..
>  
> Yep that's the right album.
>
> --- On Sat, 7/12/08, slurryguy <slurryguy@...> wrote:
>
> From: slurryguy <slurryguy@...>
> Subject: [papercreters] Re: Blade Safetys end again using correct
address
> To: papercreters@yahoogroups.com
> Date: Saturday, July 12, 2008, 5:50 PM
>
>
>
>
> I think this is the album you're referring to:
> http://ph.groups. yahoo.com/ group/papercrete rs/spshow/ bd68
>
> That machine looks like the kind of thing this guy would use:
> http://www.youtube. com/watch? v=e9LJZ-yaZ78
>
> hehehe
>
> --- In papercreters@ yahoogroups. com, Pat B Parham
> <texasweldinginspec tor@> wrote:
> >
> > Hope there is an album in Group Pictures as ''My Blade'' showing
> all a what and how.
> >
> > --- On Tue, 7/8/08, slurryguy <slurryguy@ ..> wrote:
> >
> > From: slurryguy <slurryguy@ ..>
> > Subject: [papercreters] Re: Blade Safetys end again using correct
> address
> > To: papercreters@ yahoogroups. com
> > Date: Tuesday, July 8, 2008, 9:41 PM
> >
> >
> >
> >
> >
> >
> > I like it. It's simple, cheap, and effective.
> >
> > There's just one thing missing...
> >
> > Where's your pictures of your whizbang gizmo?
> > Your explaination is excellent, but a picture will allow us to
> > officially name it the Parham Bucketizer.. . or some other fun
name
> of
> > your choosing.
> >
> > :)
> >
> > --- In papercreters@ yahoogroups. com, Pat B Parham
> > <texasweldinginspec tor@> wrote:
> > >
> > >
> > >
> > > --- On Mon, 7/7/08, Pat B Parham <texasweldinginspec tor@>
wrote:
> > >
> > > From: Pat B Parham <texasweldinginspec tor@>
> > > Subject: Blade safety
> > > To: papercreters@ ...
> > > Date: Monday, July 7, 2008, 11:41 PM
> > >
> > >
> > >
> > >
> > >
> > >
> > > There has been several notes about blades coming through side
of
> > buckets and this is the way I protected myself from this hazard,
> took
> > very little time and less than $5. Remember safety does NOT
> > cost money or time, but unsafe cost you and your loved
> ones.  Instead
> > of a big drill I found a 1'' impact wrench on E-BAY and as this
did
> > not have a chuck to hold my blade. I bought a 1/2'' floor flange
> and
> > a 4"X1/2'' NIPPLE at the hardware store, and then bolted flg. to
> > center of bucket. Then welded blade 2'' up the mixer
> shaft, inserted
> > 2'' of shaft into nipple and now no matter what my mixer blade
> STAYS
> > in the center of my bucket. Worked on the 30 gal. drum I
> built also.
> > Just make sure you turn your shaft clockwise looking down and the
> > nipple will never come out. Also makes a handy holder, just
release
> > the switch and everything stays put. I did put a 1/4'' wafer wood
> > false bottom on to hold the bolts.  
> > >
> >
>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/papercreters/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:papercreters-digest@yahoogroups.com
mailto:papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/