If you make your bricks using perlite you can call them fiber
reinforced lightweight concrete - that is already approved within the
code- Clyde--- In papercreters@yahoogroups.com, "ElfNori" <elf@...> wrote:
>
> Found it on a Colorado green building site.
>
> The provisions of this code are not intended to prevent the
installation of any material or to prohibit any design or method of
construction not specifically prescribed by this code, provided that
any such alternative has been approved. An alternative material,
design or method of construction shall be approved where the building
official finds that the proposed design is satisfactory and complies
with the intent of the provisions of this code, and that the material,
method or work offered is, for the purpose intended, at least the
equivalent of that prescribed in this code.
>
> Whenever there is insufficient evidence of compliance with the
provisions of this code, or evidence that a material or method does
not conform to the requirements of this code, or in order to
substantiate claims for alternative materials or methods, the building
official shall have the authority to require tests as evidence of
compliance to be made at no expense to the jurisdiction...
>
> I'm going to need the services of an engineer . . . does anyone know
of a papercrete experienced engineer? I can use Chris Zweifel, but
he's monolithic, ferrocement, not adobe or papercrete.
>
> ElfN
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:papercreters-digest@yahoogroups.com
mailto:papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
