Perhaps the most simple method I suggest to utilize these type of molds
would be to make an extremely thick slurry. If you can get the
consistency to approach modeling clay, it would be best.
That would allow you to pack all the details of the mold, then pack the
bulk of the mold, then be able to almost immediately unmold it onto a
screen or sand bed. This will allow it to dry properly.
I have not used papercrete in this manner, so I don't know for certain
how well it will work.
Safety tip: Using this technique will probably require you to do a lot
of details with your hands in the slurry. WEAR RUBBER GLOVES. For
those that aren't already aware, cement and lime can severely dry out
your skin and in some cases cause burns. At best it is unpleasant, at
worst it can cause serious injury. Latex kitchen work gloves are cheap
and commonly available. If you have a latex allergy, I'm sure there
are some other options on the market.
--- In papercreters@yahoogroups.com, "Lynda" <wimple6th@...> wrote:
>
> I've enjoyed reading the thread concerning papercrete and
> modeling/sculpting. That is my area of interest.
>
> I also have a number of concrete molds for lawn sculpture. Can
> papercrete be used in those molds to make lighter weight statuary?
The
> molds are mostly latex with fiberglass backing.
>
> Any thoughts or experience with this?
>
> Thanks, Lynda
>
> P.S. Carol: your angel and mushrooms look great!
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:papercreters-digest@yahoogroups.com
mailto:papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
