Re: [papercreters] Re: rollers for stationary mixer

Cannt seem to get the link to work

ken

daleandbren <daleandbren@yahoo.com> wrote:

Here is a pic of the one I built, and then scrapped for a car axle, I
could not come up with a way to gear it down, it ran so fast it was
like a blender, i used the mower deck spindle in the bottom of the
tank but the splined shaft would only let me use a sprocket made for
a mower, about 4 or 5 inches, way to high a gearing. The other pics
are my car axle mixer, down with roller problems, oh well.


http://www.flickr.com/welcome/5923150/186584/




--- In papercreters@yahoogroups.com, "D. F." wrote:
>
> I'm still thinking about it. At very least there would be some kind
of pulley and belt system; as you see on the more expensive lawn
mowers - using a small gas engine rather than a car wheel. That just
seems inefficient and unsafe to me.
>
> ----- Original Message ----
> From: ken bolin
> To: papercreters@yahoogroups.com
> Sent: Friday, September 28, 2007 6:42:35 PM
> Subject: Re: [papercreters] Re: rollers for stationary mixer
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Sounds like a good plan to me I take it you would be going pulley
to pulley. One on the pto and one on the rim or a big pulley attached
to the axle hub?
> Ken
>
> "D. F." wrote:
> I'm reading your discussion with interest as I plan how I
will do something similar later. Would it be useful to include some
kind of belt drive to make the rotor churn? I've seen long, wide
belts attached between a tractor PTO and stone corn grinders or sugar
cane crushers. If there were a sudden stop, the belt would slip on
the pulley until you turn off the engine or press the clutch.
>
>
>
>
>
> Catch up on fall's hot new shows on Yahoo! TV. Watch previews, get
listings, and more!
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>





Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:papercreters-digest@yahoogroups.com
mailto:papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

---

Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. __._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___