What I was envisioning is a system that would pump the pulp from a tanker, and another pump that would inject premixed cement/water slurry into the hose. It would take some calibration to get the right mix, and there would be some sort of mixing action in the nozzle perhaps. Maybe something like the spiral nozzle used on some epoxy tubes.
That is about as far as I got, since I don't have a source of pulp other than my mixers. A system like this would require forms large enough to handle a whole load of pulp at one time, of course. It could probably be adapted for spraying, too.
spaceman All opinions expressed or implied are subject to change without notice upon receipt of new information. http://Starship-Enterprises.Net
On 1/20/2011 1:21 PM, Ion Gorun wrote:
Spaceman --
Really interesting what you say - I am following for almost one year the list, intending in the fall to start experimenting, but never heard about papercrete made directly from cement and paper pulp. Can you please be more specific on how you see this happening? I can get quite easily recycled paper pulp, in different consistencies (i.e. with more or less water in it).
Thank you,
Ion
2011/1/20 Spaceman <Spaceman@starship-enterprises.net>
I think that the mechanical pulp should also be healthier than pulp processed with chlorine, which is extremely toxic. When I was in high school my family lived within smelling distance of a pulp mill. It's too bad I didn't know about papercrete back then. A few tanker truckloads of pulp could make a house almost overnight with the right formwork in place. It should be easy to rig up a pump system that also injects cement slurry so you could go straight from the tanker into the form in one easy shot. If there was a pulp mill within driving distance I would probably do papercrete almost every day. : )
spaceman All opinions expressed or implied are subject to change without notice upon receipt of new information. http://Starship-Enterprises.Net
On 1/5/2011 7:38 PM, ca1205 wrote:----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1191 / Virus Database: 1435/3390 - Release Date: 01/19/11I guess I should ask some questions this spring when I going the Pulp Mill shut-down in Grande Prairie Alberta. I believe the virgin pulp is a little stronger than recycled. Chlorine mills have better pulp than thermo mechanical mills. Even though the latter is way more environmentally friendly. I don't think getting paper is a problem for most people anyway. I live a cross the road from the recycle depot. I can help them out when it starts blow away with are normal 100km winds. ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/papercreters/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/papercreters/join (Yahoo! ID required) <*> To change settings via email: papercreters-digest@yahoogroups.com papercreters-fullfeatured@yahoogroups.com <*> To unsubscribe from this group, send an email to: papercreters-unsubscribe@yahoogroups.com <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1191 / Virus Database: 1435/3392 - Release Date: 01/20/11
__._,_.___
