Sunday, May 9, 2010

Re: [papercreters] Re: Papercrete Garden Wall



Like fish and company, it will start to smell after a couple of days. A little lime will delay the smell, heat will accelerate it. Bubbly mix makes light pc.

spaceman  All opinions expressed or implied are subject to change without notice upon receipt of new information.

On 5/9/2010 8:05 AM, sholmes_pta wrote:
 Thank you all for your help and input. I am going to try to start soaking my paper today. I think I will make a few garden pots and try one with latex and another with the deck stain and let them sit out for a few days to see how they hold up.   If I make a batch of paper pulp in a trash can does anyone know how long it may last before it starts to go bad? I am assuming that after a while, it may start to mold or smell.    --- In papercreters@yahoogroups.com, "F." <fml@...> wrote:   
 I have some information that may be helpful to you here: http://papercreteparadise.blogspot.com/ I've had luck building large decorative outdoor structures using two methods: slip form and daubing over a wire armature. Making slip forms would be too difficult without some sort of larger mixer, but you can make the mix for daubing in a five gallon bucket by hand. The slip-form wall I made has stood up well to the elements, but then my cat starting using it as a scratching post, so I experimented with covering it with a lime/sand plaster, which made an even prettier wall and has so far has solved the scratching post problem. Thanks. Mike  --- In papercreters@yahoogroups.com, "sholmes_pta" <sholmes_pta@> wrote:     
 Have you ever read something, gotten an idea, & you eat, sleep & dream it. I stumbled across papercrete when researching making my own garden container pots. Now…well, I have so many ideas. There is so much info out that I am hoping I can get inspired as well as correctly informed here.   My largest idea is replacing a lattice type fence that surrounds my composting area with a papercrete wall that would resemble stacked rock wall.  I would like to make a mold to make flat stone type bricks but have so many questions. If anyone has any helpful information, I would greatly appreciate it. If it matters, I live in central North Carolina where we have our share of rain & humidity. Hubby doesn't "get" my projects so most will have to be easy for me to do on my own. But I am handy with  a few of his tools.  1.	Are there different recipes for different structure types? 2.	Since it is exposed to the elements do I need to seal it & or worry about insects? 3.	Can I use a stain on it to match our fencing and deck? 4.	Since I will be stacking them, what is the best way to lay them? (do I need to use what ever masons use or can I use papercrete between them. I have never laid brick before) 5.	I will be making this in small batches. Can I mix with something fixed onto my electric drill?        
     
    ------------------------------------  Yahoo! Groups Links  <*> To visit your group on the web, go to:     http://groups.yahoo.com/group/papercreters/  <*> Your email settings:     Individual Email | Traditional  <*> To change settings online go to:     http://groups.yahoo.com/group/papercreters/join     (Yahoo! ID required)  <*> To change settings via email:     papercreters-digest@yahoogroups.com      papercreters-fullfeatured@yahoogroups.com  <*> To unsubscribe from this group, send an email to:     papercreters-unsubscribe@yahoogroups.com  <*> Your use of Yahoo! Groups is subject to:     http://docs.yahoo.com/info/terms/   
 
No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.819 / Virus Database: 271.1.1/2862 - Release Date: 05/08/10 12:26:00


__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___