It probably depends on the amount of paint that is used and how well the paint is mixed before it is put in (if the paint has been sitting around long much of that makes paint paint has settled at the bottom and should be mixed well to coordinate it back into the rest of the liquid.); and, I would imagine, how much water is used in the mix.
So you are saying that latex paint will speed up the curing process? I have found that it slows down the papercrete curing.
Sincerely, Judith
Check out my new Squidoo Lens at http://www.squidoo.com/papercretebyjudith
EMAILING FOR THE GREATER GOOD
Join me
To: papercreters@yahoogroups.com
From: robertmerrill1953@yahoo.com
Date: Sat, 17 Oct 2009 03:40:26 +0000
Subject: [papercreters] Re: F/C joins earthship
The term "kick" is used to describe set-up time. If we have found one flaw in F/C it is the length of cure time. I found by accident that latex paint has an effect on the cure time. Whilst doing a workshop at Lost Valley we thru some discarded paint in the tow mixer. As usual we did not use it all and I simply covered it for the next days class. Imagine my surprise to find a half full tow mixer solidified the next a.m.!! I have since been using latex to cure times more reasonable and to add some moisture resistence to the mix.
Yes, F/C stands for Fibrecrete which is none other than P/C papercrete. I particularly refer to a mix that utilizes emulsified fibre, portland cement, lime, clay, and sand. It gives me the non-shrink material necessary for the plastering of bare strawbales.
No, there is never such a thing as a stupid question...... maybe some dumb answers though?! hahaha
--
Chinese herbals for the Western Mind
www.ozbotanicals.com
Skype~eve8mon
__._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___