Welcome to the list, Anthony. It's usually pretty lively around here so don't let the present lull fool you. Eventually Slurry Guy will come out of hibernation and start some activity.
One of our list members was casting a pc chair a few weeks ago. He made an upside down plywood mold that could come apart for air flow to aid with drying once the pc set up. Haven't heard yet how it turned out. Maybe we'll get a report.
That evil spherical trig can be fun. My copy of domebook II still has a cover, tattered but mostly intact. I was just yesterday working on a new design that uses 4x12 sheets of plywood to make four identical triangles by cutting the sheet in half and then cutting the diagonals. Thirty sheets yield 120 triangles that when assembled make a nice 24' sphere, or fifteen sheets for a hemisphere with 450 square feet of floor space. Of course you'd want to cover it with papercrete for insulation. Later I'll post a link to a webpage that will explain in more detail, once I get it finished.
Spaceman
One of our list members was casting a pc chair a few weeks ago. He made an upside down plywood mold that could come apart for air flow to aid with drying once the pc set up. Haven't heard yet how it turned out. Maybe we'll get a report.
That evil spherical trig can be fun. My copy of domebook II still has a cover, tattered but mostly intact. I was just yesterday working on a new design that uses 4x12 sheets of plywood to make four identical triangles by cutting the sheet in half and then cutting the diagonals. Thirty sheets yield 120 triangles that when assembled make a nice 24' sphere, or fifteen sheets for a hemisphere with 450 square feet of floor space. Of course you'd want to cover it with papercrete for insulation. Later I'll post a link to a webpage that will explain in more detail, once I get it finished.
Spaceman
Anthony Spangler wrote:
Greetings to all!__._,_.___
I'm new to the list, having just "discovered" papercrete shortly before the holidays. I've been lurking and soaking up information, enjoying the videos and posts. Since almost everyone is frozen out (it's below 20 degrees F here in Indiana), it seemed like a good time for an introduction and first post. I'm an urban renter (for now) so I'm not ready to try anything too large. I've worked in hand made paper and papier mache off and on for over 25 years now, so papercrete seems like a natural extension. Having a long held interest in papier mache and how it was once used for everything from carriages to furniture to houses and even boats, I can't help but wonder if papercrete couldn't be used in furniture design, especially where weight is an issue. My two daughters are not so many years out of college so I still have vivid memories of lugging heavy furniture up and down many flights of stairs. Sometimes, however, a massive appearing design is just what is required.
Has anyone had experience in any kind of furniture, benches, tables or what not? I did note Sunshine's photo album of small sculptures (very cool).
I was also prompted by recent dome posts to dust off my tattered, cover-less copy of "Dome Book 2", which long ago introduced me to the magic of domes, and the evil of spherical trig.
Regards,
Tony
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___