Saturday, January 22, 2011

Re: [papercreters] Re: my first posting



Hi Josephine,
On the bottom of most posts to this forum is a link to Photos.  This the real "learning area" as far as I'm concerned, especially if a picture is worth a thousand words.  One of our members, Bob the Builder, has posted some really explicit photos of his experiments with Papercrete (PC) as far as sidewalks are concerned.  I believe he used adobe (mud) in some instead of (or in addition to) portland cement like many of the rest of us use.  He will jump in here and explain it I'm sure.

Anyway here is a direct link to his sidewalk "stones" and then you could look at all the other cool pictures as well.

 http://groups.yahoo.com/group/papercreters/photos/album/1000048770/pic/list

CAUTION: Visiting this site of pictures may steal your life from you!  Your time may not be your own and all your friends may think you've suddenly changed nationalities with this new language you speak.

Have fun.
Ron


 

Hi Ben
 
Thankyou for your reply
I dont know if I was expecting anything...but that was great. If you have a pic of the sidewalk for me that would be wonderful..
 
Josephine


We had some extra papercrete and put it on the ground as a sidewalk. Amazingly, it has held up even though: 1) it is directly on dirt with no provisions for drainage; 2) we are NY, a more humid climate than some; and 3) it is under trees. I am not sure it stays truly hard, but it has not disintegrated.


I will try to attach a pix "Papercrete Sidewalk" to this. Just as an aside, the irregular appearance of our little test house is because we were trying different finishin coats.

Ben Viglietta

--- In papercreters@yahoogroups.com, "Josephine" <josephine15@...> wrote:
>
> Judith
>
> This is my very first message.
>
> I am fascinated with Papercrete and want to know if you can apply it directly to the ground to make slabs to walk on or to have under a patio or make a path with it. This would save a lot of time leveling the ground etc.
>
> And do you think Papercrete would be suitable for this application in all environments ...like rain and hot sun that we have here in Australia?
>
> Cant wait to hear your reply
>
> Many thanks
> Josephine
> Australia
> ----- Original Message -----
> From: JUDITH WILLIAMS
>
> I agree with Spaceman that the simple form of papercrete should be all that is needed. However, if you have something lying around that you would throw away anyway you could consider putting it in the mix. I ended up with thousands of woven polypropylene bags a few years ago. When I tried to fill one to use as an earthbag I discovered that they had deteriorated and are not strong enough. So I'm thinking of using some of them as an underlayment for a papercrete floor or just cutting them up and throwing then in the mixer. I know I am tired of moving them every time in neaten up. I haven't deviated much from the original "recipe" but I think anything that has fibers would be fine in a mix. They must be kept short though or they will tangle around the blade.
>
> They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.
> ~ in Memoirs of the Life and Writings of Benjamin Franklin
>

> To: papercreters@yahoogroups.com
> From: Spaceman@...
>
>
> For what purpose? Papercrete is fine for building just the way it is, plenty of compression strength. I don't think anyone wants to build a bank vault with it. IMHO if you are looking for a material with high tensile strength, you want something other than papercrete. My experience with putting metal into papercrete is that the pc shrinks away from the metal leaving it rattling around in a void. I don't have a source of cuttings to try in a batch, but since you do, how about doing some tests and posting the results?
>
> Rope would add some nice fibers, would probably need to be cut into short pieces and then shredded so that the fibers can mix with the paper. Just throwing rope into a mix won't work too well. Again, why would you want to do this since pc works great without it? It seems to be a lot of extra work for possibly a marginal improvement.
>
>
> spacemanAll opinions expressed or impliedare subject to change without noticeupon receipt of new information.http://Starship-Enterprises.Net
> On 1/14/2011 4:52 AM, derk wrote:
> The reason i ask is i watched a tv programme about safe bank vault building and in the concreting process they use stainless steel cuttings which make the finished concrete slab amazingly strong in both compression and tensile situations. For papercrete i imagine you need a scrap product that would adhere readily to it. IF you used old rope how long would the strand of rope have to be , when in the process would you add them to the papercrete mix , how else would adding rope effect the other qualities of the finished product... derk
>



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Friday, January 21, 2011

Re: [papercreters] Re: my first posting



No, a standard cement mixer does not work well for papercrete. You want more of a blending action instead. A plaster mixing blade that chucks into a drill is cheap and works fairly well. Home made cross blade mixers can be made from a couple of metal straps bolted onto a long piece of all thread rod. Of course if you are doing a large project you'll want a tow mixer, or at least a barrel mixer. A power spray washer will turn a barrel half full of paper into a barrel full of pulp in a few minutes. You want to end up with the paper fibers separated, the more homogeneous it is, the stronger your final product will be.

Just mixing shredded paper with gypsum will not give you a product anything like papercrete. Papercrete does great for sculpture, it works like clay.



spaceman  All opinions expressed or implied are subject to change without notice upon receipt of new information.  http://Starship-Enterprises.Net

On 1/21/2011 12:01 PM, Joy Pickens wrote:
I am new to this site also, (my first post). I have been collecting shredded paper in huge bags from the local college. Are you all talking about 'the mixer' being a cement mixer? I have one of those. I didn't know about paercrete. I just kept thinking that there was a way to build and/or sculpture. I keep thinking of sort of a combination of a sculptored building or garden wall. Anyway, I have mixed the shredded paper with Gypsum cement in sort of an atempt as seeing what I could do with it. And about the walkway. Some of it has gotten wet and walked on a lot and makes a nice sort of step, but gets (just a little) squishy when it gets wet again.
Joy in OK
 

From: "bencv@ymail.com" <bviglietta@fiberinstrumentsales.com>
To: papercreters@yahoogroups.com
Sent: Fri, January 21, 2011 8:44:55 AM
Subject: [papercreters] Re: my first posting

 



We had some extra papercrete and put it on the ground as a sidewalk. Amazingly, it has held up even though: 1) it is directly on dirt with no provisions for drainage; 2) we are NY, a more humid climate than some; and 3) it is under trees. I am not sure it stays truly hard, but it has not disintegrated.

I will try to attach a pix "Papercrete Sidewalk" to this. Just as an aside, the irregular appearance of our little test house is because we were trying different finishin coats.

Ben Viglietta

--- In papercreters@yahoogroups.com, "Josephine" <josephine15@...> wrote:
>
> Judith
>
> This is my very first message.
>
> I am fascinated with Papercrete and want to know if you can apply it directly to the ground to make slabs to walk on or to have under a patio or make a path with it. This would save a lot of time leveling the ground etc.
>
> And do you think Papercrete would be suitable for this application in all environments ...like rain and hot sun that we have here in Australia?
>
> Cant wait to hear your reply
>
> Many thanks
> Josephine
> Australia
> ----- Original Message -----
> From: JUDITH WILLIAMS
> To: papercreters papercreters
> Sent: Saturday, January 15, 2011 12:03 AM
> Subject: RE: [papercreters] Re: my first posting
>
>
>
> I agree with Spaceman that the simple form of papercrete should be all that is needed. However, if you have something lying around that you would throw away anyway you could consider putting it in the mix. I ended up with thousands of woven polypropylene bags a few years ago. When I tried to fill one to use as an earthbag I discovered that they had deteriorated and are not strong enough. So I'm thinking of using some of them as an underlayment for a papercrete floor or just cutting them up and throwing then in the mixer. I know I am tired of moving them every time in neaten up. I haven't deviated much from the original "recipe" but I think anything that has fibers would be fine in a mix. They must be kept short though or they will tangle around the blade.
>
> They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.
> ~ in Memoirs of the Life and Writings of Benjamin Franklin
>
> Follow progress on the new project at http://www.papercretebyjudith.com/blog
>
> More papercrete info at http://squidoo.com/papercretebyjudith
>
>
>
>
>
>
>
> ----------------------------------------------------------
> To: papercreters@yahoogroups.com
> From: Spaceman@...
> Date: Fri, 14 Jan 2011 08:50:08 -0700
> Subject: Re: [papercreters] Re: my first posting
>
>
> For what purpose? Papercrete is fine for building just the way it is, plenty of compression strength. I don't think anyone wants to build a bank vault with it. IMHO if you are looking for a material with high tensile strength, you want something other than papercrete. My experience with putting metal into papercrete is that the pc shrinks away from the metal leaving it rattling around in a void. I don't have a source of cuttings to try in a batch, but since you do, how about doing some tests and posting the results?
>
> Rope would add some nice fibers, would probably need to be cut into short pieces and then shredded so that the fibers can mix with the paper. Just throwing rope into a mix won't work too well. Again, why would you want to do this since pc works great without it? It seems to be a lot of extra work for possibly a marginal improvement.
>
>
> spacemanAll opinions expressed or impliedare subject to change without noticeupon receipt of new information.http://Starship-Enterprises.Net
> On 1/14/2011 4:52 AM, derk wrote:
> The reason i ask is i watched a tv programme about safe bank vault building and in the concreting process they use stainless steel cuttings which make the finished concrete slab amazingly strong in both compression and tensile situations. For papercrete i imagine you need a scrap product that would adhere readily to it. IF you used old rope how long would the strand of rope have to be , when in the process would you add them to the papercrete mix , how else would adding rope effect the other qualities of the finished product... derk
>



No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1191 / Virus Database: 1435/3394 - Release Date: 01/21/11



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Re: [papercreters]



The papercrete underfloor in my small dome was poured onto a sheet of polyethylene with drainage slots cut in it, several years ago. The front stoop for this dome, and also the back stoop for my larger dome were poured directly onto the dirt. The back stoop has been in place for ten years, in an area where the ground is often wet. None of these show any effects from being on the ground. I do live in a low rain area so YMMV if you live in a rain forest.

spaceman  All opinions expressed or implied are subject to change without notice upon receipt of new information.  http://Starship-Enterprises.Net

On 1/21/2011 2:21 PM, Greg House wrote:
There was someone on this list who'd done some sidewalks around his house with papercrete. Most people say it's best to think of it as a wood product rather then masonry in terms of protecting it, but this guy said it held up great for at least a couple of years.

Greg


From: Josephine <josephine15@bigpond.com>
To: papercreters@yahoogroups.com
Sent: Thu, January 20, 2011 10:00:57 PM
Subject: [papercreters]

 

Sir/Madam
 
This is my very first message.
 
I am fascinated with Papercrete and want to know if you can apply it directly to the ground to make slabs to walk on or to have under a patio or make a path with it. This would save a lot of time leveling the ground etc.
 
And do you think Papercrete would be suitable for this application in all environments ...like rain and hot sun that we have here in Australia?
 
Cant wait to hear your reply
 
Many thanks
Josephine
Australia


No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1191 / Virus Database: 1435/3394 - Release Date: 01/21/11



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Re: [papercreters]



Greg
 
Thankyou for your reply...was great to hear from you.
 
Yes I'm saving up my paper and getting a shredder for experimenting.
 
Cant Wait
 
Josephine
Australia
----- Original Message -----
From: Greg House
Sent: Saturday, January 22, 2011 5:21 AM
Subject: Re: [papercreters]

 

There was someone on this list who'd done some sidewalks around his house with papercrete. Most people say it's best to think of it as a wood product rather then masonry in terms of protecting it, but this guy said it held up great for at least a couple of years.

Greg


From: Josephine <josephine15@bigpond.com>
To: papercreters@yahoogroups.com
Sent: Thu, January 20, 2011 10:00:57 PM
Subject: [papercreters]

 

Sir/Madam
 
This is my very first message.
 
I am fascinated with Papercrete and want to know if you can apply it directly to the ground to make slabs to walk on or to have under a patio or make a path with it. This would save a lot of time leveling the ground etc.
 
And do you think Papercrete would be suitable for this application in all environments ...like rain and hot sun that we have here in Australia?
 
Cant wait to hear your reply
 
Many thanks
Josephine
Australia



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Re: [papercreters] Re: my first posting



Hi Ben
 
Thankyou for your reply
I dont know if I was expecting anything...but that was great. If you have a pic of the sidewalk for me that would be wonderful..
 
Josephine
Australia
----- Original Message -----
Sent: Friday, January 21, 2011 10:44 PM
Subject: [papercreters] Re: my first posting

 



We had some extra papercrete and put it on the ground as a sidewalk. Amazingly, it has held up even though: 1) it is directly on dirt with no provisions for drainage; 2) we are NY, a more humid climate than some; and 3) it is under trees. I am not sure it stays truly hard, but it has not disintegrated.

I will try to attach a pix "Papercrete Sidewalk" to this. Just as an aside, the irregular appearance of our little test house is because we were trying different finishin coats.

Ben Viglietta

--- In papercreters@yahoogroups.com, "Josephine" <josephine15@...> wrote:
>
> Judith
>
> This is my very first message.
>
> I am fascinated with Papercrete and want to know if you can apply it directly to the ground to make slabs to walk on or to have under a patio or make a path with it. This would save a lot of time leveling the ground etc.
>
> And do you think Papercrete would be suitable for this application in all environments ...like rain and hot sun that we have here in Australia?
>
> Cant wait to hear your reply
>
> Many thanks
> Josephine
> Australia
> ----- Original Message -----
> From: JUDITH WILLIAMS
> To: papercreters papercreters
> Sent: Saturday, January 15, 2011 12:03 AM
> Subject: RE: [papercreters] Re: my first posting
>
>
>
> I agree with Spaceman that the simple form of papercrete should be all that is needed. However, if you have something lying around that you would throw away anyway you could consider putting it in the mix. I ended up with thousands of woven polypropylene bags a few years ago. When I tried to fill one to use as an earthbag I discovered that they had deteriorated and are not strong enough. So I'm thinking of using some of them as an underlayment for a papercrete floor or just cutting them up and throwing then in the mixer. I know I am tired of moving them every time in neaten up. I haven't deviated much from the original "recipe" but I think anything that has fibers would be fine in a mix. They must be kept short though or they will tangle around the blade.
>
> They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.
> ~ in Memoirs of the Life and Writings of Benjamin Franklin
>
> Follow progress on the new project at http://www.papercretebyjudith.com/blog
>
> More papercrete info at http://squidoo.com/papercretebyjudith
>
>
>
>
>
>
>
> ----------------------------------------------------------
> To: papercreters@yahoogroups.com
> From: Spaceman@...
> Date: Fri, 14 Jan 2011 08:50:08 -0700
> Subject: Re: [papercreters] Re: my first posting
>
>
> For what purpose? Papercrete is fine for building just the way it is, plenty of compression strength. I don't think anyone wants to build a bank vault with it. IMHO if you are looking for a material with high tensile strength, you want something other than papercrete. My experience with putting metal into papercrete is that the pc shrinks away from the metal leaving it rattling around in a void. I don't have a source of cuttings to try in a batch, but since you do, how about doing some tests and posting the results?
>
> Rope would add some nice fibers, would probably need to be cut into short pieces and then shredded so that the fibers can mix with the paper. Just throwing rope into a mix won't work too well. Again, why would you want to do this since pc works great without it? It seems to be a lot of extra work for possibly a marginal improvement.
>
>
> spacemanAll opinions expressed or impliedare subject to change without noticeupon receipt of new information.http://Starship-Enterprises.Net
> On 1/14/2011 4:52 AM, derk wrote:
> The reason i ask is i watched a tv programme about safe bank vault building and in the concreting process they use stainless steel cuttings which make the finished concrete slab amazingly strong in both compression and tensile situations. For papercrete i imagine you need a scrap product that would adhere readily to it. IF you used old rope how long would the strand of rope have to be , when in the process would you add them to the papercrete mix , how else would adding rope effect the other qualities of the finished product... derk
>



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Re: [papercreters]



There was someone on this list who'd done some sidewalks around his house with papercrete. Most people say it's best to think of it as a wood product rather then masonry in terms of protecting it, but this guy said it held up great for at least a couple of years.

Greg


From: Josephine <josephine15@bigpond.com>
To: papercreters@yahoogroups.com
Sent: Thu, January 20, 2011 10:00:57 PM
Subject: [papercreters]

 

Sir/Madam
 
This is my very first message.
 
I am fascinated with Papercrete and want to know if you can apply it directly to the ground to make slabs to walk on or to have under a patio or make a path with it. This would save a lot of time leveling the ground etc.
 
And do you think Papercrete would be suitable for this application in all environments ...like rain and hot sun that we have here in Australia?
 
Cant wait to hear your reply
 
Many thanks
Josephine
Australia



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Re: [papercreters] Re: my first posting



I am new to this site also, (my first post). I have been collecting shredded paper in huge bags from the local college. Are you all talking about 'the mixer' being a cement mixer? I have one of those. I didn't know about paercrete. I just kept thinking that there was a way to build and/or sculpture. I keep thinking of sort of a combination of a sculptored building or garden wall. Anyway, I have mixed the shredded paper with Gypsum cement in sort of an atempt as seeing what I could do with it. And about the walkway. Some of it has gotten wet and walked on a lot and makes a nice sort of step, but gets (just a little) squishy when it gets wet again.
Joy in OK
 

From: "bencv@ymail.com" <bviglietta@fiberinstrumentsales.com>
To: papercreters@yahoogroups.com
Sent: Fri, January 21, 2011 8:44:55 AM
Subject: [papercreters] Re: my first posting

 



We had some extra papercrete and put it on the ground as a sidewalk. Amazingly, it has held up even though: 1) it is directly on dirt with no provisions for drainage; 2) we are NY, a more humid climate than some; and 3) it is under trees. I am not sure it stays truly hard, but it has not disintegrated.

I will try to attach a pix "Papercrete Sidewalk" to this. Just as an aside, the irregular appearance of our little test house is because we were trying different finishin coats.

Ben Viglietta

--- In papercreters@yahoogroups.com, "Josephine" <josephine15@...> wrote:
>
> Judith
>
> This is my very first message.
>
> I am fascinated with Papercrete and want to know if you can apply it directly to the ground to make slabs to walk on or to have under a patio or make a path with it. This would save a lot of time leveling the ground etc.
>
> And do you think Papercrete would be suitable for this application in all environments ...like rain and hot sun that we have here in Australia?
>
> Cant wait to hear your reply
>
> Many thanks
> Josephine
> Australia
> ----- Original Message -----
> From: JUDITH WILLIAMS
> To: papercreters papercreters
> Sent: Saturday, January 15, 2011 12:03 AM
> Subject: RE: [papercreters] Re: my first posting
>
>
>
> I agree with Spaceman that the simple form of papercrete should be all that is needed. However, if you have something lying around that you would throw away anyway you could consider putting it in the mix. I ended up with thousands of woven polypropylene bags a few years ago. When I tried to fill one to use as an earthbag I discovered that they had deteriorated and are not strong enough. So I'm thinking of using some of them as an underlayment for a papercrete floor or just cutting them up and throwing then in the mixer. I know I am tired of moving them every time in neaten up. I haven't deviated much from the original "recipe" but I think anything that has fibers would be fine in a mix. They must be kept short though or they will tangle around the blade.
>
> They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.
> ~ in Memoirs of the Life and Writings of Benjamin Franklin
>
> Follow progress on the new project at http://www.papercretebyjudith.com/blog
>
> More papercrete info at http://squidoo.com/papercretebyjudith
>
>
>
>
>
>
>
> ----------------------------------------------------------
> To: papercreters@yahoogroups.com
> From: Spaceman@...
> Date: Fri, 14 Jan 2011 08:50:08 -0700
> Subject: Re: [papercreters] Re: my first posting
>
>
> For what purpose? Papercrete is fine for building just the way it is, plenty of compression strength. I don't think anyone wants to build a bank vault with it. IMHO if you are looking for a material with high tensile strength, you want something other than papercrete. My experience with putting metal into papercrete is that the pc shrinks away from the metal leaving it rattling around in a void. I don't have a source of cuttings to try in a batch, but since you do, how about doing some tests and posting the results?
>
> Rope would add some nice fibers, would probably need to be cut into short pieces and then shredded so that the fibers can mix with the paper. Just throwing rope into a mix won't work too well. Again, why would you want to do this since pc works great without it? It seems to be a lot of extra work for possibly a marginal improvement.
>
>
> spacemanAll opinions expressed or impliedare subject to change without noticeupon receipt of new information.http://Starship-Enterprises.Net
> On 1/14/2011 4:52 AM, derk wrote:
> The reason i ask is i watched a tv programme about safe bank vault building and in the concreting process they use stainless steel cuttings which make the finished concrete slab amazingly strong in both compression and tensile situations. For papercrete i imagine you need a scrap product that would adhere readily to it. IF you used old rope how long would the strand of rope have to be , when in the process would you add them to the papercrete mix , how else would adding rope effect the other qualities of the finished product... derk
>




__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___