Thursday, April 18, 2013

[papercreters] Re: Crosscut shredder

Brilliant!

Now I'll have to see if there's an Australian version at the hardware, Bunnings, etc. I'll see what's available.

Thanks, man, for the tip. Appreciates it.

Alexander

--- In papercreters@yahoogroups.com, "eepjr24" <eepjr24@...> wrote:
>
> Have you considered sourcing the shredded paper from a local waste / shredding company?
>
> If you want something that is reasonably affordable to pulp the paper (no shredding needed), I (and others) have shown how to use a pressure washer (especially with a turbo jet nozzle) to pulp medium batches of paper. Not sure of the scale you are looking for, but it is probably a lot more cost effective than a shredder.
>
> - Ernie
>
> --- In papercreters@yahoogroups.com, "XanderDeafman" <xanderdeafman1@> wrote:
> >
> > Yeah, I bought Fellowes Ds-500C Cross Cut Shredder for $89.00 from Officeworks.
> >
> > Problem was, it's too slow, it heats up too fast, and stops to cool down every so often. VERY frustrating. It's no good. It's only to be used once in a while, like in an office setting, not at home shoving a pile of paper through to get the crosscut done fast.
> >
> > Tomorrow I'll take it back and get the refund.
> >
> > Damn it.
> >
> > I have a look for INDUSTRIAL shredders... they're BLOODY expensive. How can a poor fellow like me afford their crap?
> >
> > I tested my 3 or so years old Vita-Mix blender on the crosscuts of papers I managed to shove through, and I learned how quickly the blender made short work of the paper... lovely.
> >
> > But I knew it would messes up the Vita-mix blender, so I'm thinking of a powerful electric motor to build, to make a home-made giant electric blender/mixer, that would mixes the paper AND water, and cement, etc. That would do several jobs in one. Makes more sense to me.
> >
> > But I ain't no electrician or electronic geek. If I could find plans, maybe I can jimmy the thing together and it'll work. Oh well.
> >
> > That's about it.
> >
> > Oh yeah, I want to make papercrete headstone for my dad, sneak in the cemetery, put it there, and disappear. Eh eh. No one would notice for a long time, I'll bet. With a heavy base of real concrete with metal stones, I think, that would be good, to anchor papercrete headstone in place. 'Course, the whole thing will be covered with waterproofing, like varnishes, clear ones, or maybe enamel, I think. I'll see if those are good, if I could just get a good blender/mixer... something to work the papers into pulp and mix in the cement, etc etc.
> >
> > It'll be fun.
> >
> > --- In papercreters@yahoogroups.com, JUDITH WILLIAMS <williams_judith@> wrote:
> > >
> > >
> > > I know there has been discussion about this in the past and there are some who shred paper. But I have always thought it better to keep the cellulose fibers long. That way they can bind everything together and prevent cracks. If you look at the illustration on www.livinginpaper.com you will see how the fibers encapsulate the cement and entrap air to increase insulation.
> > >
> > > Sincerely, Judith
> > >
> > > Check out my new papercrete blog http://www.papercretebyjudith.com/blog and leave me a comment.
> > >
> > > Check out my new Squidoo Lens at http://www.squidoo.com/papercretebyjudith
> > >
> > >
> > >
> > >
> > > EMAILING FOR THE GREATER GOOD
> > > Join me
> > >
> > > To: papercreters@yahoogroups.com
> > > From: Carl@
> > > Date: Tue, 2 Mar 2010 13:38:03 +0000
> > > Subject: [papercreters] Crosscut shredder
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Would something like these paper shredders do the job for small scale production?
> > >
> > > I read that one of these cuts particles down too nearly as small as the paper blow-in insulation from Home Depot/Lowes.
> > >
> > > Thanks,
> > >
> > > Carl (new to PC)
> > >
> > > http://tinyurl.com/ykldbrx
> > >
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[papercreters] Re: Crosscut shredder

Have you considered sourcing the shredded paper from a local waste / shredding company?

If you want something that is reasonably affordable to pulp the paper (no shredding needed), I (and others) have shown how to use a pressure washer (especially with a turbo jet nozzle) to pulp medium batches of paper. Not sure of the scale you are looking for, but it is probably a lot more cost effective than a shredder.

- Ernie

--- In papercreters@yahoogroups.com, "XanderDeafman" <xanderdeafman1@...> wrote:
>
> Yeah, I bought Fellowes Ds-500C Cross Cut Shredder for $89.00 from Officeworks.
>
> Problem was, it's too slow, it heats up too fast, and stops to cool down every so often. VERY frustrating. It's no good. It's only to be used once in a while, like in an office setting, not at home shoving a pile of paper through to get the crosscut done fast.
>
> Tomorrow I'll take it back and get the refund.
>
> Damn it.
>
> I have a look for INDUSTRIAL shredders... they're BLOODY expensive. How can a poor fellow like me afford their crap?
>
> I tested my 3 or so years old Vita-Mix blender on the crosscuts of papers I managed to shove through, and I learned how quickly the blender made short work of the paper... lovely.
>
> But I knew it would messes up the Vita-mix blender, so I'm thinking of a powerful electric motor to build, to make a home-made giant electric blender/mixer, that would mixes the paper AND water, and cement, etc. That would do several jobs in one. Makes more sense to me.
>
> But I ain't no electrician or electronic geek. If I could find plans, maybe I can jimmy the thing together and it'll work. Oh well.
>
> That's about it.
>
> Oh yeah, I want to make papercrete headstone for my dad, sneak in the cemetery, put it there, and disappear. Eh eh. No one would notice for a long time, I'll bet. With a heavy base of real concrete with metal stones, I think, that would be good, to anchor papercrete headstone in place. 'Course, the whole thing will be covered with waterproofing, like varnishes, clear ones, or maybe enamel, I think. I'll see if those are good, if I could just get a good blender/mixer... something to work the papers into pulp and mix in the cement, etc etc.
>
> It'll be fun.
>
> --- In papercreters@yahoogroups.com, JUDITH WILLIAMS <williams_judith@> wrote:
> >
> >
> > I know there has been discussion about this in the past and there are some who shred paper. But I have always thought it better to keep the cellulose fibers long. That way they can bind everything together and prevent cracks. If you look at the illustration on www.livinginpaper.com you will see how the fibers encapsulate the cement and entrap air to increase insulation.
> >
> > Sincerely, Judith
> >
> > Check out my new papercrete blog http://www.papercretebyjudith.com/blog and leave me a comment.
> >
> > Check out my new Squidoo Lens at http://www.squidoo.com/papercretebyjudith
> >
> >
> >
> >
> > EMAILING FOR THE GREATER GOOD
> > Join me
> >
> > To: papercreters@yahoogroups.com
> > From: Carl@
> > Date: Tue, 2 Mar 2010 13:38:03 +0000
> > Subject: [papercreters] Crosscut shredder
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Would something like these paper shredders do the job for small scale production?
> >
> > I read that one of these cuts particles down too nearly as small as the paper blow-in insulation from Home Depot/Lowes.
> >
> > Thanks,
> >
> > Carl (new to PC)
> >
> > http://tinyurl.com/ykldbrx
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[papercreters] Re: Crosscut shredder

Yeah, I bought Fellowes Ds-500C Cross Cut Shredder for $89.00 from Officeworks.

Problem was, it's too slow, it heats up too fast, and stops to cool down every so often. VERY frustrating. It's no good. It's only to be used once in a while, like in an office setting, not at home shoving a pile of paper through to get the crosscut done fast.

Tomorrow I'll take it back and get the refund.

Damn it.

I have a look for INDUSTRIAL shredders... they're BLOODY expensive. How can a poor fellow like me afford their crap?

I tested my 3 or so years old Vita-Mix blender on the crosscuts of papers I managed to shove through, and I learned how quickly the blender made short work of the paper... lovely.

But I knew it would messes up the Vita-mix blender, so I'm thinking of a powerful electric motor to build, to make a home-made giant electric blender/mixer, that would mixes the paper AND water, and cement, etc. That would do several jobs in one. Makes more sense to me.

But I ain't no electrician or electronic geek. If I could find plans, maybe I can jimmy the thing together and it'll work. Oh well.

That's about it.

Oh yeah, I want to make papercrete headstone for my dad, sneak in the cemetery, put it there, and disappear. Eh eh. No one would notice for a long time, I'll bet. With a heavy base of real concrete with metal stones, I think, that would be good, to anchor papercrete headstone in place. 'Course, the whole thing will be covered with waterproofing, like varnishes, clear ones, or maybe enamel, I think. I'll see if those are good, if I could just get a good blender/mixer... something to work the papers into pulp and mix in the cement, etc etc.

It'll be fun.

--- In papercreters@yahoogroups.com, JUDITH WILLIAMS <williams_judith@...> wrote:
>
>
> I know there has been discussion about this in the past and there are some who shred paper. But I have always thought it better to keep the cellulose fibers long. That way they can bind everything together and prevent cracks. If you look at the illustration on www.livinginpaper.com you will see how the fibers encapsulate the cement and entrap air to increase insulation.
>
> Sincerely, Judith
>
> Check out my new papercrete blog http://www.papercretebyjudith.com/blog and leave me a comment.
>
> Check out my new Squidoo Lens at http://www.squidoo.com/papercretebyjudith
>
>
>
>
> EMAILING FOR THE GREATER GOOD
> Join me
>
> To: papercreters@yahoogroups.com
> From: Carl@...
> Date: Tue, 2 Mar 2010 13:38:03 +0000
> Subject: [papercreters] Crosscut shredder
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Would something like these paper shredders do the job for small scale production?
>
> I read that one of these cuts particles down too nearly as small as the paper blow-in insulation from Home Depot/Lowes.
>
> Thanks,
>
> Carl (new to PC)
>
> http://tinyurl.com/ykldbrx
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[papercreters] re:



http://www.perspectivesjeunesse.org/components/com_content/blogname.php?gdgzdvfl712yd































































































































\\\\\\\\\\\\
It is the quality rather than the quantity that matters. -- Lucius Annaeus Seneca


__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Tuesday, April 16, 2013

[papercreters] Re: Another papercrete house completed.



Here in and around Alpine Texas we have built 3 papercrete houses with permits....no problem.  Anyone trying to get a permit anywhere else might possibly use this as an example for getting one. 
 
Tom


__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

[papercreters] Re: Another papercrete house completed.

You nailed it, Terry.

I stumbled across that video, but I didn't recognize it as the Ed Moody place.

After checking, I'm 100% positive that it's the Moody home.

Good eye, Terry. Thanks.

--- In papercreters@yahoogroups.com, "azglassblaster" <blazingsaddles@...> wrote:
>
> I'm going to guess Lake Havasu, Arizona. There's a completed papercrete house here, that I haven't seen yet (just pix), that looks like that and was built by a man named Ed. I need to find out how he got a building permit for it.
>
> --- In papercreters@yahoogroups.com, "JayH" <slurryguy@> wrote:
> >
> > I'm surprised that when I searched the message archives that I never found a reference to this YouTube video.
> >
> > http://www.youtube.com/watch?v=_8rGiZR8W-c
> >
> > Looks like it was built somewhere in Texas based upon some of the designs, but I'm just guessing.
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Monday, April 15, 2013

RE: [papercreters] Another papercrete house completed.



I know of one or two papercrete houses built with permits in the  Farming ton NM area. Lex Terry knows the guy who did them. He is an iron worker so did a post and beam with welded metal pipes. Lex also put a papercrete addition on his house and built a papercrete shop. I believe he had permits for those. I don't think Lex is a member of this group but he is on Facebook.


To: papercreters@yahoogroups.com
From: donald1miller@yahoo.com
Date: Mon, 15 Apr 2013 11:06:52 -0700
Subject: Re: [papercreters] Another papercrete house completed.

 
Anyone familiar with using Papercrete would know that this kind of building is totally doable and makes a safe comfortable dwelling. The problem is unless you want to relocate to some remote area of the country and try to fly under the code/permit radar it is not possible. Is there any answer or hope forthcoming? I doubt it as the bureaucratic infrastructure is not about to relinquish their control. Too much money and too many jobs to perpetuate in the system  for this to happen. So all these videos and pictures and stories of people building papercrete houses is just good for a warm fuzzy and nothing else.

--- On Mon, 4/15/13, JayH <slurryguy@yahoo.com> wrote:

From: JayH <slurryguy@yahoo.com>
Subject: [papercreters] Another papercrete house completed.
To: papercreters@yahoogroups.com
Date: Monday, April 15, 2013, 4:17 AM

 
I'm surprised that when I searched the message archives that I never found a reference to this YouTube video.

http://www.youtube.com/watch?v=_8rGiZR8W-c

Looks like it was built somewhere in Texas based upon some of the designs, but I'm just guessing.




__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___