Hi folks, I began with papercrete with my lovely x-wife over ten years ago in an effort to support people's rights to affect their own home environment. I would like to here about your projects. Go see our work at www.evesgarden.org and tell us about yours. Clyde
Sent from my iPadwhom is doing which
------------------------------------
Posted by: clydetcurry@yahoo.com
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Tuesday, May 13, 2014
RE: [papercreters] Leave up foam forms
To: papercreters@yahoogroups.com
From: papercreters@yahoogroups.com
Date: Tue, 13 May 2014 19:43:33 -0500
Subject: Re: [papercreters] Leave up foam forms
Sent from my iPad
__._,_.___
__,_._,___
Re: [papercreters] Leave up foam forms
Hello Murrey, this is Clyde Curry. Both high strength and low shrinkage can be obtained by filling the mix with aggregate as you would with conventional mortar. Here is a mix I will personally quarentee as I have made over 30000 of these blocks. Begin by supplying 2.5 lbs of cement per lb. of dry paper fiber. 37.6 of fiber and 94 lbs of cement , volume of cement would be 1 cubic foot add 2.5 times that volume of aggregate- I suggest perlite or reground styrofoam - this will make the mix drain and lower shrinkage - I suggest that 12 % of the weight of cement be replaced with Pozzolan ( as in metakaolin ) this will help lower moisture retention-
Sent from my iPad
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)
<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Re: [papercreters] Leave up foam forms
I don't compress papercrete, so I'm afraid I'm not much help on that subject. With slip forms, you don't need to compress. You also don't need reinforcing steel, sticks, or any other junk thrown into the mix.
I have seen various compression methods proposed, like a press similar to a Cinva Ram. Another one that is in our photos area uses hydraulic cylinders to compress. I have not seen results from these, and I think they turned out to be more trouble than they were worth.
Papercrete does very well by itself without any compression. It should not be used for applications needing high structural strength, though 12" thick pc walls will support well over 30,000 pounds per running foot in the right application. You can probably increase that strength, but it is already plenty high for most purposes. If you need more compressive strength, or want tensile strength, then papercrete might not be the ideal material for your purpose.
Why would you want to compress it? If it is to facilitate the use of foam forms, then that is questionable. Foam forms are expensive and offer no advantages over simple wooden forms. They will end up with air voids between the foam and the papercrete. Better to use simple forms that are removed after the pc sets.
Hello Spaceman:)Thanks fr your comments about shrinkage. I am attempting some slip form walls. I have been experimenting with different mixes and methods. I tried roding similar to consolidating concrete but still have the shrinkage problem. What method of "compressing" are you suggesting?
Any assistance you can provide is most appreciated.
Thanks and best wishesMurry
On Tuesday, April 29, 2014 7:05 PM, spaceman <Spaceman@starship-enterprises.net> wrote:
Papercrete will shrink away from forms like this unless you compress it. That would be difficult to do with foam forms.
spaceman
On 4/29/2014 2:10 PM, s tolman wrote:
How do leave up foam forms work?No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4570 / Virus Database: 3931/7413 - Release Date: 04/29/14
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4577 / Virus Database: 3950/7487 - Release Date: 05/13/14
__._,_.___![]()
__,_._,___
Re: [papercreters] Leave up foam forms
spaceman
How do leave up foam forms work?No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4570 / Virus Database: 3931/7413 - Release Date: 04/29/14
__._,_.___
__,_._,___
