Friday, May 3, 2013

Re: [papercreters] 4D printing and papercrete

Your photo did not make it here. Can you put it in the photos area and
post a link to it?

On 5/3/2013 9:46 AM, ashokchand2000 wrote:
> From: Ashok Mathur <ashokchand2000@yahoo.com>
> Sent: Friday, May 3, 2013 9:08 PM
> Subject: 4d Printing and papercrete
> The link below has two videos.
> http://www.washingtonpost.com/blogs/innovations/wp/2013/05/01/what-you-may-not-know-about-4d-printing/?wpisrc=nl_tech_b
> The first video is from TED talk and you will see some examples that will make direct sense to you.
> The second video is in nature of an advertisement for MIT school of architecture and normally I would not have given its link.
> But suddenly between 1 minute 13 seconds and 1 minute 17 seconds you see a very different mixing blade for papercrete.
> Its easily makeable from a simple iron sheet .
> I have attached a still picture from the video for you to appreciate the mixer blade design.
> It mixes and foams.
>
> Regards
> Ashok
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.3272 / Virus Database: 3162/6293 - Release Date: 05/03/13
>
>



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[papercreters] 4D printing and papercrete

From: Ashok Mathur <ashokchand2000@yahoo.com>
Sent: Friday, May 3, 2013 9:08 PM
Subject: 4d Printing and papercrete
The link below has two videos.
http://www.washingtonpost.com/blogs/innovations/wp/2013/05/01/what-you-may-not-know-about-4d-printing/?wpisrc=nl_tech_b
The first video is from TED talk and you will see some examples that will make direct sense to you.
The second video is in nature of an advertisement for MIT school of architecture and normally I would not have given its link.
But suddenly between 1 minute 13 seconds and 1 minute 17 seconds you see a very different mixing blade for papercrete.
Its easily makeable from a simple iron sheet .
I have attached a still picture from the video for you to appreciate the mixer blade design.
It mixes and foams.

Regards
Ashok





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Thursday, May 2, 2013

[papercreters] Re: Brick Press

Is there a need for a consistent block? I'm thinking apply the plunger to the end of the block, so wall thickness and block height are consistent, but block length varies a little. Much quicker, no need to worry about measurement.

It should also be possible to press several blocks in series, so one pressing yields a row of blocks. The construction can be quite simple, if you have basic fab skills. Make a hollow rectangular tube slit down 2 opposite corners, add quick clamps. Fill with alternating buckets of pulp & wood blocks. Press. Pressing mechanisms can be very basic.

AIUI the big plus of blocks is that they suit transporting the product somewhere, hence their widespread use. But pouring a wall in situ's less work, or spraying one. OTOH compressed paper is a good bit stronger, its instantly stable, and dries far faster.

PS my first blocks were pressed right away, no predraining.



--- In papercreters@yahoogroups.com, "smt460" <smt460@...> wrote:
>
> Hi every one I haven't posted in a long time on here but saw the posts on block presses.
> We did this 3 yrs ago and the conclusion was it would cost to much per block in time as we found slip forming would be much quicker.
> 1 takes 2 hrs for pulp to drain before it can be pressed.
> 2 once drained getting the correct amount drained pc into the compartment for a consistent block.
> 3 block needs to be compressed at 1500 lbs so the chamber has to be built very strong and still have holes for drainage.
> 4 You must be a person with huge mechanical skills to build one of these as the hydraulics and fabricating must be correct for your safety.
> There are some pics on the fourm of our press it did work well and we could put out 3 blocks a min but labor and time made it not worth it.
> hope this helps answers some questions.
> Clair.




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[papercreters] Re: Brick Press

Hi every one I haven't posted in a long time on here but saw the posts on block presses.
We did this 3 yrs ago and the conclusion was it would cost to much per block in time as we found slip forming would be much quicker.
1 takes 2 hrs for pulp to drain before it can be pressed.
2 once drained getting the correct amount drained pc into the compartment for a consistent block.
3 block needs to be compressed at 1500 lbs so the chamber has to be built very strong and still have holes for drainage.
4 You must be a person with huge mechanical skills to build one of these as the hydraulics and fabricating must be correct for your safety.
There are some pics on the fourm of our press it did work well and we could put out 3 blocks a min but labor and time made it not worth it.
hope this helps answers some questions.
Clair.

--- In papercreters@yahoogroups.com, john mcginnis <maruadventurer@...> wrote:
>
> Jeff,
>
> I agree the typical papercrete mix would be too watery. But I suspect --
>
> * separate pulper to produce the pulp.
> * drain pulp and extract much of the water.
> * Mix the pulp, sand, crete in a std mixer to proper consistency.
> * drop into the former and compress.
>
> No it will not be a Michael Sands lite block, but a heavier block still
> suitable for construction.
>
> Calle, Go to the website -- http://www.dme.co.za/. They provide the pricing
> for their machinery on the site.
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[papercreters] Re: Brick Press

you know i was thinking about this some more, i think his press is so expensive because he isn't building it himself, which means if you want to go that way you need to find someone to make you a one off press

--- In papercreters@yahoogroups.com, T Phillips <doglover1918@...> wrote:
>
> I've missed something along the way. What is a Michael Sands light block?
>
> Tina in Colorado
>
> *Before you criticize someone, walk a mile in their shoes.
> (Then when you do criticize them, you�re a mile away and you have their
> shoes.) *
>
>
> On Wed, May 1, 2013 at 9:35 PM, john mcginnis <maruadventurer@...>wrote:
>
> > **
> >
> >
> > Jeff,
> >
> > I agree the typical papercrete mix would be too watery. But I suspect --
> >
> > * separate pulper to produce the pulp.
> > * drain pulp and extract much of the water.
> > * Mix the pulp, sand, crete in a std mixer to proper consistency.
> > * drop into the former and compress.
> >
> > No it will not be a Michael Sands lite block, but a heavier block still
> > suitable for construction.
> >
> > Calle, Go to the website -- http://www.dme.co.za/. They provide the
> > pricing for their machinery on the site.
> >
> >
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [papercreters] Re: Brick Press



I've missed something along the way. What is a Michael Sands light block?

Tina in Colorado

Before you criticize someone, walk a mile in their shoes.
(Then when you do criticize them, you're a mile away and you have their shoes.)


On Wed, May 1, 2013 at 9:35 PM, john mcginnis <maruadventurer@gmail.com> wrote:
 

Jeff,
 
I agree the typical papercrete mix would be too watery. But I suspect --
 
* separate pulper to produce the pulp.
* drain pulp and extract much of the water.
* Mix the pulp, sand, crete in a std mixer to proper consistency.
* drop into the former and compress.
 
No it will not be a Michael Sands lite block, but a heavier block still suitable for construction.
 
Calle, Go to the website -- http://www.dme.co.za/. They provide the pricing for their machinery on the site.




__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Wednesday, May 1, 2013

[papercreters] Re: Brick Press



Jeff,
 
I agree the typical papercrete mix would be too watery. But I suspect --
 
* separate pulper to produce the pulp.
* drain pulp and extract much of the water.
* Mix the pulp, sand, crete in a std mixer to proper consistency.
* drop into the former and compress.
 
No it will not be a Michael Sands lite block, but a heavier block still suitable for construction.
 
Calle, Go to the website -- http://www.dme.co.za/. They provide the pricing for their machinery on the site.


__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___