Friday, February 4, 2011

[papercreters] Re: Idea... Gypsum and a box of rocks

Well the answer depends on several things...

1) Is it gypsum powder actually cheaper than concrete? I mean cheaper in dollars than concrete?

2) Is gypsum powder powder more green?

By more green I mean is still a plentiful resource and does it's preparation and transport cost less in carbon emissions than concrete?

3) Will the simple pour in place batch based mixture I propose work?

Or would it have too many large air voids or other failure modes?

4) Why would I want to do it at all?

Well as cheap as paper is, it still isn't really free and plenty of places have a ready supply of rocks on site and in such case they really are pretty close to free.

Also there are lots of ways of recycling paper and while I am all for papercrete it is not the only game in town. I would prefer that paper recycling take the most carbon conservative path possible (CO2 emissions wise.) So not knowing that answer off the top of my head I am not going to endorse papercrete based paper recycling over other forms of paper recycling (until I do know the answer.)

5) Why this over papercrete?

Because it would most likely be stronger in terms of compressive strength (to be determined) and because sometimes all you want is thermal mass not insulation and solid rock will beat the heck out of papercrete for that purpose.


Finally, I imagine that if one wanted to do this at all? Most likely it would be as part of a hybrid building system where you add lots of thermal mass to the interior of a building (making heavy high thermal mass floors and walls and such) with this system and you make outer walls out of papercrete.

The best possible system has lots and lot of mass surrounded by lots and lots of insulation.

Thanks: Steve

More thermal mass, gypsum is cheaper than concrete
--- In papercreters@yahoogroups.com, JUDITH WILLIAMS <williams_judith@...> wrote:
>
>
> What is the objective here? To use up some gypsum you have lying around? Why not just use paper? it is free and works great.
>
> They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.
>
> ~ in Memoirs of the Life and Writings of Benjamin Franklin
>
> Follow progress on the new project at http://www.papercretebyjudith.com/blog
>
> More papercrete info at http://squidoo.com/papercretebyjudith
>
>
>
>
> To: papercreters@yahoogroups.com
> From: steven.ivy@...
> Date: Wed, 2 Feb 2011 06:29:53 +0000
> Subject: [papercreters] Idea... Gypsum and a box of rocks
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> What would happen if you packed a form with rocks and then poured in gypsum and let it set?
>
>
>
> Yes, I know gypsum is pretty soft but in this system it is really only the binder the rocks themselves will be carrying most of the weight and of course you would want to seal the block with a breathable sealer before use to prevent water from perhaps one day entering the gypsum.
>
>
>
> Advantages...
>
>
>
> Each big brick could be batch built alone (and would be ready to use 20 minutes after pouring.
>
>
>
> You set up the form on top of the last poured row of blocks, you fill in the rock, you mix enough gypsum for the one block, you pour it, you wait 20 minutes you break down the form and set it up for the next block.
>
>
>
> I am pretty sure that gypsum will breath (unlike straight . Is anyone here sure about that?
>
>
>
> I just wonder how expensive plain dehydrated gypsum is?
>
>
>
> Another idea...
>
>
>
> What would happen if you could QUICKLY mix up anhydrous gypsum and a slurry of water and paper fibers?
>
>
>
> Obviously the setting time and drying time would shrink greatly, but just how strong could the blocks be?
>
>
>
> Thanks: Steve
>


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Thursday, February 3, 2011

RE: [papercreters] Idea... Gypsum and a box of rocks



What is the objective here? To use up some gypsum you have lying around? Why not just use paper? it is free and works great.

They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.
~ in Memoirs of the Life and Writings of Benjamin Franklin

Follow progress on the new project at http://www.papercretebyjudith.com/blog

More papercrete info at http://squidoo.com/papercretebyjudith





To: papercreters@yahoogroups.com
From: steven.ivy@gmail.com
Date: Wed, 2 Feb 2011 06:29:53 +0000
Subject: [papercreters] Idea... Gypsum and a box of rocks

 
What would happen if you packed a form with rocks and then poured in gypsum and let it set?

Yes, I know gypsum is pretty soft but in this system it is really only the binder the rocks themselves will be carrying most of the weight and of course you would want to seal the block with a breathable sealer before use to prevent water from perhaps one day entering the gypsum.

Advantages...

Each big brick could be batch built alone (and would be ready to use 20 minutes after pouring.

You set up the form on top of the last poured row of blocks, you fill in the rock, you mix enough gypsum for the one block, you pour it, you wait 20 minutes you break down the form and set it up for the next block.

I am pretty sure that gypsum will breath (unlike straight . Is anyone here sure about that?

I just wonder how expensive plain dehydrated gypsum is?

Another idea...

What would happen if you could QUICKLY mix up anhydrous gypsum and a slurry of water and paper fibers?

Obviously the setting time and drying time would shrink greatly, but just how strong could the blocks be?

Thanks: Steve




__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

RE: [papercreters] What is it that shrinks in papercrete?



Sorry. ????

They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.
~ in Memoirs of the Life and Writings of Benjamin Franklin

Follow progress on the new project at http://www.papercretebyjudith.com/blog

More papercrete info at http://squidoo.com/papercretebyjudith





To: papercreters@yahoogroups.com
From: lilyklink@yahoo.com
Date: Thu, 3 Feb 2011 18:41:07 -0800
Subject: Re: [papercreters] What is it that shrinks in papercrete?

 

I don't have any experience in this, (YET) but I have had the cement truck come out several times, and I have gone to the cement plant and talked to the man in charge. He explained to me that the more water, the weaker the cement and more shrinkage. I sounds like (Judith's?) way of mixing up the paper water thing to dry out and wet later into papercrete would dissolve the paper well, but you wouldn't have to add as much water when you reconstitute it.
 
Joy


From: JUDITH WILLIAMS <williams_judith@hotmail.com>
To: papercreters papercreters <papercreters@yahoogroups.com>
Sent: Thu, February 3, 2011 8:09:38 PM
Subject: RE: [papercreters] What is it that shrinks in papercrete?

 
When you look at a picture of the way the fibers in the paper separate and are filled in with the cement you will understand why it shrinks so much. If you put in a minimal amount of cement the fibers will sink down as the water leaches out. More cement will mean less shrinkage. I have added pumice fines to increase the mineral content which cuts down on shrinkage and also makes papercrete unpalatable to insects and rodents. I would say most of the things you suggest as additives would work OK, some better than others. if you are mostly concerned with the shrinkage problem I would say add more cement or other mineral content. I have not tried a lot of things myself but probably would of I had them around. I especially think the grasses and such things would be fine. Charmaine Taylor has a lot of experience with this sort of thing. If she doesn't chime in here and if you really want some answers you should email her at papercrete.com

They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.
~ in Memoirs of the Life and Writings of Benjamin Franklin

Follow progress on the new project at http://www.papercretebyjudith.com/blog

More papercrete info at http://squidoo.com/papercretebyjudith






To: papercreters@yahoogroups.com
From: steven.ivy@gmail.com
Date: Thu, 3 Feb 2011 04:45:22 +0000
Subject: [papercreters] What is it that shrinks in papercrete?

 
I was just wondering what is it exactly that causes the shrinkage we see in so many mixes of PC?

Is ir as I assume, the paper cellulose fibers?

So even if it means not using paper, what other admixtures could be added to decrease the shrinking problem and not give up the nice tensile and insulation properties?

Some substances I have considered as "papercrete" ad-mixtures...

Sawdust, Lawn grass clippings, ground and sifted dried leaves, Pulverized bamboo, Vertiver grass (long, medium, and, or short fiber versions),
Shredded plastic bottles, broken glass bottles (may want to polish this material for beauty), Shredded plastic shopping bags, Shredded up old carpet, Shredded up old clothing, shredded old rubber tires, Mulched tree bark and or twigs, wheat straw, shredded scrap wood from regular construction, pine needles, Shredded old tar roof waste, rice hulls, peanut hulls, some sort of a human healthy dried fungus...

So what do you think? Any of that worth a shot?






__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Re: [papercreters] What is it that shrinks in papercrete?



I don't have any experience in this, (YET) but I have had the cement truck come out several times, and I have gone to the cement plant and talked to the man in charge. He explained to me that the more water, the weaker the cement and more shrinkage. I sounds like (Judith's?) way of mixing up the paper water thing to dry out and wet later into papercrete would dissolve the paper well, but you wouldn't have to add as much water when you reconstitute it.
 
Joy


From: JUDITH WILLIAMS <williams_judith@hotmail.com>
To: papercreters papercreters <papercreters@yahoogroups.com>
Sent: Thu, February 3, 2011 8:09:38 PM
Subject: RE: [papercreters] What is it that shrinks in papercrete?

 

When you look at a picture of the way the fibers in the paper separate and are filled in with the cement you will understand why it shrinks so much. If you put in a minimal amount of cement the fibers will sink down as the water leaches out. More cement will mean less shrinkage. I have added pumice fines to increase the mineral content which cuts down on shrinkage and also makes papercrete unpalatable to insects and rodents. I would say most of the things you suggest as additives would work OK, some better than others. if you are mostly concerned with the shrinkage problem I would say add more cement or other mineral content. I have not tried a lot of things myself but probably would of I had them around. I especially think the grasses and such things would be fine. Charmaine Taylor has a lot of experience with this sort of thing. If she doesn't chime in here and if you really want some answers you should email her at papercrete.com

They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.
~ in Memoirs of the Life and Writings of Benjamin Franklin

Follow progress on the new project at http://www.papercretebyjudith.com/blog

More papercrete info at http://squidoo.com/papercretebyjudith





To: papercreters@yahoogroups.com
From: steven.ivy@gmail.com
Date: Thu, 3 Feb 2011 04:45:22 +0000
Subject: [papercreters] What is it that shrinks in papercrete?

 
I was just wondering what is it exactly that causes the shrinkage we see in so many mixes of PC?

Is ir as I assume, the paper cellulose fibers?

So even if it means not using paper, what other admixtures could be added to decrease the shrinking problem and not give up the nice tensile and insulation properties?

Some substances I have considered as "papercrete" ad-mixtures...

Sawdust, Lawn grass clippings, ground and sifted dried leaves, Pulverized bamboo, Vertiver grass (long, medium, and, or short fiber versions),
Shredded plastic bottles, broken glass bottles (may want to polish this material for beauty), Shredded plastic shopping bags, Shredded up old carpet, Shredded up old clothing, shredded old rubber tires, Mulched tree bark and or twigs, wheat straw, shredded scrap wood from regular construction, pine needles, Shredded old tar roof waste, rice hulls, peanut hulls, some sort of a human healthy dried fungus...

So what do you think? Any of that worth a shot?





__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

RE: [papercreters] What is it that shrinks in papercrete?



When you look at a picture of the way the fibers in the paper separate and are filled in with the cement you will understand why it shrinks so much. If you put in a minimal amount of cement the fibers will sink down as the water leaches out. More cement will mean less shrinkage. I have added pumice fines to increase the mineral content which cuts down on shrinkage and also makes papercrete unpalatable to insects and rodents. I would say most of the things you suggest as additives would work OK, some better than others. if you are mostly concerned with the shrinkage problem I would say add more cement or other mineral content. I have not tried a lot of things myself but probably would of I had them around. I especially think the grasses and such things would be fine. Charmaine Taylor has a lot of experience with this sort of thing. If she doesn't chime in here and if you really want some answers you should email her at papercrete.com

They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.
~ in Memoirs of the Life and Writings of Benjamin Franklin

Follow progress on the new project at http://www.papercretebyjudith.com/blog

More papercrete info at http://squidoo.com/papercretebyjudith





To: papercreters@yahoogroups.com
From: steven.ivy@gmail.com
Date: Thu, 3 Feb 2011 04:45:22 +0000
Subject: [papercreters] What is it that shrinks in papercrete?

 
I was just wondering what is it exactly that causes the shrinkage we see in so many mixes of PC?

Is ir as I assume, the paper cellulose fibers?

So even if it means not using paper, what other admixtures could be added to decrease the shrinking problem and not give up the nice tensile and insulation properties?

Some substances I have considered as "papercrete" ad-mixtures...

Sawdust, Lawn grass clippings, ground and sifted dried leaves, Pulverized bamboo, Vertiver grass (long, medium, and, or short fiber versions),
Shredded plastic bottles, broken glass bottles (may want to polish this material for beauty), Shredded plastic shopping bags, Shredded up old carpet, Shredded up old clothing, shredded old rubber tires, Mulched tree bark and or twigs, wheat straw, shredded scrap wood from regular construction, pine needles, Shredded old tar roof waste, rice hulls, peanut hulls, some sort of a human healthy dried fungus...

So what do you think? Any of that worth a shot?




__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Wednesday, February 2, 2011

[papercreters] What is it that shrinks in papercrete?

I was just wondering what is it exactly that causes the shrinkage we see in so many mixes of PC?

Is ir as I assume, the paper cellulose fibers?

So even if it means not using paper, what other admixtures could be added to decrease the shrinking problem and not give up the nice tensile and insulation properties?

Some substances I have considered as "papercrete" ad-mixtures...

Sawdust, Lawn grass clippings, ground and sifted dried leaves, Pulverized bamboo, Vertiver grass (long, medium, and, or short fiber versions),
Shredded plastic bottles, broken glass bottles (may want to polish this material for beauty), Shredded plastic shopping bags, Shredded up old carpet, Shredded up old clothing, shredded old rubber tires, Mulched tree bark and or twigs, wheat straw, shredded scrap wood from regular construction, pine needles, Shredded old tar roof waste, rice hulls, peanut hulls, some sort of a human healthy dried fungus...

So what do you think? Any of that worth a shot?

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[papercreters] Idea... Gypsum and a box of rocks

What would happen if you packed a form with rocks and then poured in gypsum and let it set?

Yes, I know gypsum is pretty soft but in this system it is really only the binder the rocks themselves will be carrying most of the weight and of course you would want to seal the block with a breathable sealer before use to prevent water from perhaps one day entering the gypsum.

Advantages...

Each big brick could be batch built alone (and would be ready to use 20 minutes after pouring.

You set up the form on top of the last poured row of blocks, you fill in the rock, you mix enough gypsum for the one block, you pour it, you wait 20 minutes you break down the form and set it up for the next block.

I am pretty sure that gypsum will breath (unlike straight . Is anyone here sure about that?

I just wonder how expensive plain dehydrated gypsum is?

Another idea...

What would happen if you could QUICKLY mix up anhydrous gypsum and a slurry of water and paper fibers?

Obviously the setting time and drying time would shrink greatly, but just how strong could the blocks be?

Thanks: Steve

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/papercreters/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/papercreters/join
(Yahoo! ID required)

<*> To change settings via email:
papercreters-digest@yahoogroups.com
papercreters-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
papercreters-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/